Search Results
1241 Products for "te-cx"
Filter
- Description
- Self-drilling pan head screw (A4 stainless steel) with 12 mm washer for thin metal-to-metal fastenings (up to 4.0 mm)
- Base materials
- Carbon steel, Aluminium
- Environmental conditions
- Dry indoor, Indoor with temporary condensation, Outdoor with low pollution, Outdoor with moderate concentration of pollution, Outdoor, areas with heavy industrial pollution, Close proximity to roads, Coastal areas
- Screw head diameter
- 12 mm
- Description
- Threaded stud for fastening grating and checker plate to steel
- Base materials
- Steel, Stainless steel, Cast iron
- Minimum thickness of base material (steel)
- 8 mm
- Corrosion protection
- Corrosion protection equivalent to A4(316)
- Description
- Single plasterboard screw (phosphate-coated) for fastening plasterboard to wood
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- No
- Description
- Single drywall screw (zinc-plated) for fastening plasterboard to wood
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- No
- Description
- Single drywall screw (zinc-plated) for fastening plasterboard to metal
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- No
- Description
- Conduit clip to fasten insulated single pipes for mechanical applications
- Application
- Cable Fastenings, Conduit Fastening
- Base materials
- Concrete, Masonry
- Material composition
- Steel
- Description
- Pipe clamp saddle for connecting threaded components to MT channels
- Material composition
- S235JR, DD11 MOD, Amstrong 240MC
- Material and coating
- Carbon steel - indoor coated
- Material thickness
- 2.5 mm
- Description
- Ultimate galvanised pipe clamp saddle – fire-tested according to ETA
- Approvals
- ETA
- Product class
- Premium
- Material composition
- Nut: C4C - DIN EN 10263, Plate: S 235 JRG2 - DIN EN 10025, Plastic: PBT
- Description
- Stainless steel (A2) flat washer corresponding to ISO 7089
- Required material grade
- A2
- Material composition
- Stainless steel A2 – DIN EN ISO 7089
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Galvanised hex nut with flange corresponding to DIN 6923 8
- Material composition
- Steel grade 8
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Light-duty
- Description
- Hot-dip galvanised (HDG) hexagon screw corresponding to DIN 933
- Material composition
- Steel grade 8.8
- Surface finish
- Outdoor Coated - HDG
- Load range
- Medium-duty
- Description
- Stainless steel (A2) hexagon screw corresponding to DIN 933
- Required material grade
- A2
- Material composition
- Stainless steel A2-70
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Hot-dip galvanised (HDG) flat washer corresponding to ISO 7089
- Material composition
- Steel - DIN EN ISO 7089
- Surface finish
- Outdoor Coated - HDG
- Load range
- Light-duty
- Description
- Stainless steel (A4) flat washer corresponding to ISO 7089
- Required material grade
- A2, A4
- Material composition
- Stainless steel A4 – DIN EN ISO 7089
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Stainless steel (A2) hexagon nut corresponding to DIN 934
- Required material grade
- A2
- Material composition
- Stainless steel A2-70
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Stainless steel (A4) hexagon nut corresponding to DIN 934
- Required material grade
- A2, A4
- Material composition
- Stainless steel A4-70
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Gas can for use with the GX 120 gas nailer
- For use with (tools)
- GX 120, GX 120-ME
- Substances contained
- i-buthene, propene, propane
- Storage temperature - min.
- 5 °C
- Description
- Self-drilling pan head screw (A2 stainless steel) with 12 mm washer for medium-thick metal-to-metal fastenings (up to 6.0 mm)
- Base materials
- Carbon steel, Aluminium
- Environmental conditions
- Dry indoor, Indoor with temporary condensation, Outdoor with low pollution, Outdoor with moderate concentration of pollution
- Screw head diameter
- 12 mm
- Description
- medium-duty C-Channel profile for use with MT-FL/MT-TL components in outdoor environments
- Material composition
- S280 or better steel
- Surface finish
- Outdoor Coated - ZM
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- medium-duty C-Channel profile for use with MT-FL/MT-TL components in indoor environments
- Material composition
- S280 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- medium-duty C-Channel profile for use with MT-FL/MT-TL components in outdoor environments
- Material composition
- S280 or better steel
- Surface finish
- Outdoor Coated - ZM
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- medium-duty C-Channel profile for use with MT-FL/MT-TL components in indoor environments
- Material composition
- S280 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- medium-duty C-Channel profile for use with MT-FL/MT-TL components in outdoor environments
- Material composition
- S280 or better steel
- Surface finish
- Outdoor Coated - ZM
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- medium-duty C-Channel profile for use with MT-FL/MT-TL components in indoor environments
- Material composition
- S280 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- medium-duty C-Channel profile for use with MT-FL/MT-TL components in indoor environments
- Material composition
- S280 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- medium-duty C-Channel profile for use with MT-FL/MT-TL components in outdoor environments
- Material composition
- S280 or better steel
- Surface finish
- Outdoor Coated - ZM
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Interior metal framing screw (zinc-plated) for fastening stud to track
- Screw head type
- Wafer head
- Screw drive/recess type
- PH #2
- Collated
- No
ultimate
- Description
- Nail for fastening channels, pipe rings and suspended ceilings to concrete
- Base materials
- Concrete (soft), Concrete (tough)
- Minimum thickness of base material (concrete)
- 100 mm
- Corrosion protection
- Galvanised zinc coated <20 µm
- Description
- Premium nail for light/medium-duty fastening to concrete or steel
- Base materials
- Concrete (soft), Concrete (tough), Steel
- Minimum thickness of base material (steel)
- 4 mm
- Environmental conditions
- Dry indoor, Indoor with temporary condensation
ultimate
- Description
- Deep Hole Coring - Premium reamer to help maintain constant drilling diameters
- Type
- Sintered
- For use with
- DD 200, DD 250-CA, DD 350-CA, DD 500-CA
- Base materials
- n/a
- Description
- Sanding attachment for the oscillating multitool, for sanding wood or paint
No technical data available
- Description
- Scaffolding restraint anchor with eyelet for fastening lighter scaffolds to concrete
- Base materials
- Concrete (uncracked), Masonry (solid)
- Head configuration
- Closed eye bolt
- Approvals / test reports
- N/A
- Description
- High-performance wedge anchor for fastening fire protection boards to concrete
- Head configuration
- Flat head
- Environmental conditions
- Highly corrosive special applications, Outdoor, Outdoor (more than 1 km from coast), Outdoor with heavy industrial pollution
- Approvals / test reports
- ETA, Fire, Seismic
- Description
- Single drywall screws (phosphate-coated) for fastening drywall boards to metal
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- No
ultimate
- Description
- Ceiling hanger for use with the DX Kwik pre-drilling method
- Material
- Carbon steel
- Base materials
- Concrete (soft), Concrete (tough), Concrete (very tough)
- Environmental conditions
- Dry indoor
- Description
- Fixation plate with threaded hole for attaching media to strut channels
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Fixation plate with threaded hole for attaching media to strut channels
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Nut for attaching media to MT strut channels (imperial standard sizes)
- Material composition
- High Strength Steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Base connector for anchoring strut channel structures to concrete or steel
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Splice connector for coupling MT-60 strut channels end-to-end
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Stainless steel clamp for fastening one MQ strut channel to another
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 4 mm
- Description
- Galvanised base plate for connecting threaded components to MQ strut channels
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Galvanised decking hanger for fastening threaded rods to trapezoidal metal sheets
- Base material type
- Trapezoidal sheet, Concrete
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Beam connectors for attaching MP-PS pipe shoes to steel beams
- Fire resistance (yes/no)
- No
- Temperature resistance
- -20 - 300 °C
- Material composition
- Beam Clamps (Clamping Claw + Saddle): Cast Iron per DIN EN1562, Baseplate: S280GD per EN10346, Rectangular washer: S235JR – Yield280 per HN 707, Bolts: F Class 8.8 per ISO 898-1, Nuts: Grade 8 per ISO 898-2, Retaining Washer: C60E per EN10132-3, Cylindrical washers: Stainless Steel X5CrNi18-10 per EN10088-3
- Description
- Beam connectors for attaching MP-PS pipe shoes to steel beams
- Fire resistance (yes/no)
- No
- Temperature resistance
- -20 - 300 °C
- Material composition
- Beam Clamps (Clamping Claw + Saddle): Cast Iron per DIN EN1562, Baseplate: S280GD per EN10346, Rectangular washer: S235JR – Yield280 per HN 707, Bolts: F Class 8.8 per ISO 898-1, Nuts: Grade 8 per ISO 898-2, Retaining Washer: C60E per EN10132-3
- Description
- Galvanised channel foot for fastening MM channels to various base materials
- Product class
- Ultimate
- Material composition
- Material: DC04 - DIN EN 10130, Plate: DD11 - DIN EN 10111
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Galvanised beam clamp for fastening threaded rods to sloping steel girders
- Base material type
- Steel
- Material composition
- High-grade alloy steel S420NC
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Galvanised flat washer corresponding to ISO 7093 used in various applications
- Material composition
- Steel - DIN EN ISO 7093-1
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Light-duty
- Description
- Hanger rail for the concealed attachment of façade panels using hangers
- Length
- 6000 mm
- Material composition
- Aluminium EN AW-6063 T66
- Description
- Galvanised wedge nut used for fastening threaded rods to metal decks
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Galvanised thread adapters to connect various internal and external thread diameters
- Material composition
- Steel grade 4.6
- Surface finish
- Indoor Coated - Electro galvanised
- Load range
- Light-duty
- Description
- Galvanised air duct bracket for fastening ventilation ducts directly to ceilings
- Approvals
- Acoustic insulation DIN 4109 inspected
- Noise reduction
- 16 dB (A)
- Material composition
- DD11 - DIN EN 10111, EPDM
- Description
- Charger for the battery in FX 3-A Stud Fusion units
- Application
- Fastening to steel
- Battery System Compatibility
- FX 3-A
- Certificates
- CE
- Description
- medium-duty double C-Channel profile for use with MT-FL/MT-TL components in indoor environments
- Material composition
- S280 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- medium-duty double C-Channel profile for use with MT-FL/MT-TL components in outdoor environments
- Material composition
- S280 or better steel
- Surface finish
- Outdoor Coated - ZM
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- medium-duty double C-Channel profile for use with MT-FL/MT-TL components in outdoor environments
- Material composition
- S280GD
- Surface finish
- Outdoor Coated - ZM
- Material thickness
- 2.75 mm
- Description
- medium-duty double C-Channel profile for use with MT-FL/MT-TL components in indoor environments
- Material composition
- S280GD
- Surface finish
- Indoor Coated - Pre-galvanised
- Material thickness
- 2.75 mm
- Description
- medium-duty double C-Channel profile for use with MT-FL/MT-TL components in indoor environments
- Material composition
- S280GD
- Surface finish
- Indoor Coated - Pre-galvanised
- Material thickness
- 2 mm
- Description
- medium-duty unslotted C-Channel profile for use with MT-FL/MT-TL components in indoor environments
- Material composition
- S280GD
- Surface finish
- Indoor Coated - Pre-galvanised
- Material thickness
- 2.75 mm
- Description
- medium-duty double C-Channel profile for use with MT-FL/MT-TL components in outdoor environments
- Material composition
- S280GD
- Surface finish
- Outdoor Coated - ZM
- Material thickness
- 2 mm