All prices discounted net
TS-BT Stepped drill bit
New product
Stepped drill bits for predrilling accurate holes or removing coatings for S-BT threaded screw-in studs on aluminium and steel
No technical data available
From
£39.60
Torque tool S-BT 1/4" - 5Nm
Ultimate
5 Nm torque tool for installing S-BT threaded screw-in studs on aluminium or steel (thickness < 6 mm)
- Tightening torque: 5 Nm
- Product class: Ultimate
£95.29
Calibration card S-CC BT 6
Ultimate
Calibration card for S-BT threaded screw-in studs to ensure the correct screw-in depth
- Product class: Ultimate
£32.87
Calibration card S-CC BT HC 6
Ultimate
Calibration card for S-BT threaded screw-in studs to ensure the correct screw-in depth
- Product class: Ultimate
£32.87
Adjustable depth gauge for accurately installing S-BT threaded screw-in studs
- Base materials: Steel, Aluminium
- Product class: Ultimate
£103.13
Adjustable depth gauge for accurately installing S-BT threaded screw-in studs
- Base materials: Steel, Aluminium
- Product class: Ultimate
£119.22
Adjustable depth gauge for accurately installing S-BT threaded screw-in studs
- Base materials: Steel, Aluminium
- Product class: Ultimate
£113.54
Adjustable depth gauge for accurately installing S-BT threaded screw-in studs
- Base materials: Steel, Aluminium
- Product class: Ultimate
£105.93
Stepped drill bit for predrilling accurate holes for X-BT fasteners
- for use with (fasteners) (global): X-BT M/W 6, X-BT M/W 10, X-BT- ER M/W 6, X-BT- ER M 8, X-BT- ER M/W 10, X-BT MF M/W 10
- Base materials: Steel, Cast iron, Stainless steel
- Minimum thickness of base material (steel): 8 mm
Error occurred
Please contact us.
TX-BT 4.7/7 Stepped drill bit
New product
Stepped drill bit for pre-drilling holes for new-generation X-BT fasteners
- for use with (fasteners) (global): X-BT (new)
- Base materials: Steel
- Minimum thickness of base material (steel): 8 mm
From
£56.16
Accessories for X-BT-MF threaded studs, including sockets, T-handles and torque tools
- Additional accessory information: Socket for tightening X-BT-MF M10 threaded studs
£30.22
Accessories for X-BT-MF threaded studs, including sockets, T-handles and torque tools
- Additional accessory information: Torque tool for tightening X-BT threaded studs
£120.94
Torque tool X-BT 1/4" 20Nm / 14.8lbft
New product
Torque tool for use with new-generation X-BT threaded studs
No technical data available
£151.20
X-NSD 1/4" Socket wrench insert
New product
Nut setter for tightening flange nuts on threaded studs
No technical data available
£22.68
MR / MF Standoff thread adapter
Ultimate
Male-Female coated carbon steel threaded standoff for fastening to passive fire protection (PFP) coated steel beams
- Base materials: Steel
- Corrosion protection: Duplex coating equivalent to 45 µm hot-dip galvanized
- Product class: Ultimate
From
£181.90
