Search Results
1241 Products for "te-cx"
Filter
- Description
- High-durability joint sealant spray for high-moisture, quick-cure environments
- LEED VOC
- 65.9 g/l
- Base materials
- Concrete, Masonry, Gypsum, Metal, Steel
- Application temperature range
- 2 - 40 °C
- Description
- Wedge compression kit for quickly and easily forming a tight, effective seal within cable transit frames in potentially explosive atmospheres
- Application temperature range
- -20 - 75 °C
- Description
- Galvanised silencer for use with compressive loads
- Approvals
- Acustic insulaton DIN 4109 inspected
- For use with
- MQ system
- Material composition
- Connecting part: chromated galvanized steel, Insulation material: EPDM
- Description
- Thermal insulation pad to separate the bracket from the underlying surface
- Material composition
- PVC (hard)
standard
- Description
- Premium collated nails for fastening to concrete using powder-actuated tools
- Base materials
- Concrete (soft), Masonry (solid limestone brick)
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanised zinc coated <20 µm
- Description
- Flat T channel connector for fastening two MT channels together
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Flat channel connector used as a longitudinal extender for MT channels
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Injectable mortar accessories for brushing and guiding
No technical data available
- Description
- Flat T channel connector for fastening two MT channels together, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Collated Clean-Tec lead-free cartridges for use with DX 6 powder-actuated fastening tools
- For use with (tools)
- DX 6
- Cartridge colour
- Titanium
- Storage temperature - min.
- 5 °C
- Description
- Fast, simple, and clean firestop preformed solution for top-of-wall drywall joints and deflection heads
- Approvals
- EN 1364-1
- Length
- 3060 mm
- Application
- Joints
- Description
- 35-piece kit containing essential hand tools for window construction and everyday building maintenance
- Feature
- Tool Kit (General)
- Recess
- 10-13 x 7/16-1/2", TX10, TX15, TX20, TX25, TX30, SW7, SW8, SW10, AF13, PH1, PH2, PH3, HEX2.5, HEX3, HEX4, HEX5, HEX2, TX8
- Connection end
- 1/4 in hexagonal
- Description
- 35-piece kit containing durable, practical and time-saving hand tools for professional MEP Installers
- Feature
- Tool Kit (Mechanical)
- Recess
- HEX6, HEX5, HEX3, HEX4, PH1, PH2, TX25, TX10, TX15, TX20, PZ1, PZ2, SL0,4x2,5, SL0.6x3.5, SL0,8x4,0, SL1.0x5.5, 10-13 x 7/16-1/2", SW5.5, SW6
- Connection end
- 1/4 in hexagonal
- Description
- BS chucks for our diamond coring machines
- Additional accessory information
- BR chuck for DD 110-D, DD 110-W and DD 120
- Description
- BS chucks for our diamond coring machines
- Additional accessory information
- BT chuck for DD 110-D, DD 100-W and DD 120
- Description
- Pre-formed fire cavity barrier for non-ventilated façade applications with 120 minutes of fire integrity
- Approvals
- EN 13501-1, EN 1366-4
- Length
- 1200 mm
- Height
- 100 mm
- Description
- High-durability joint sealant spray for general purpose applications
- LEED VOC
- 34 g/l
- Base materials
- Concrete, Masonry, Gypsum, Steel, Metal
- Application temperature range
- 4 - 40 °C
- Description
- 1/2" (inch) long impact socket for tightening bolts and anchors, with magnetic impact and thin wall adaptation
- Connection end
- 1/2 in square
- Short/long
- Long
- Material coating/plating/finish
- Silver, Coated
- Description
- Anchor rod for use with injection and capsule adhesive anchors (8.8 CS HDG)
- Material, corrosion
- Carbon steel, HDG (hot-dip galvanised)/sherardised
- Environmental conditions
- Indoor with temporary condensation, Outdoor (more than 1 km from coast)
- Base materials
- Concrete (cracked), Concrete (uncracked), Masonry (hollow), Masonry (solid)
- Description
- Interchangeable universal chuck for the SF 8M-22 cordless drill driver
No technical data available
- Description
- Premium PCD/Polycrystalline change module
- For use with
- DD 200, DD 250-CA, DD 350-CA, DD 500-CA
- Base materials
- Masonry (soft materials)
- Wet or dry operation
- Wet and dry
ultimate
- Description
- Premium INC/Surface Set Change Module
- For use with
- DD 200, DD 250-CA, DD 350-CA, DD 500-CA
- Base materials
- Masonry (medium-soft materials)
- Wet or dry operation
- Wet and dry
ultimate
- Description
- Premium deep hole coring change module for all types of concrete; ≥2.5 kW tools
- Type
- Sintered
- For use with
- DD 200, DD 250-CA, DD 350-CA, DD 500-CA
- Base materials
- Concrete, Natural stone
- Description
- Case for carrying foams, cleaners and other items
No technical data available
- Description
- BS chucks for our diamond coring machines
No technical data available
- Description
- Pre-formed fire cavity barrier (full board) for non-ventilated façade applications with 120 minutes of fire integrity
- Approvals
- EN 13501-1, EN 1366-4
- Length
- 1200 mm
- Height
- 100 mm
- Description
- Extractor tool to remove stuck core bits from the base material
- Accessory type
- Other
- Description
- Interchangeable self-tightening chuck for the SF 8M-22 cordless drill driver
No technical data available
premium
- Description
- Formwork spacer with pre-mounted nail for positioning formwork on concrete footings
- Dimensions (LxWxH)
- 49.3 x 49.3 x 32.2 mm
- Material
- High-density polyethylene (HDPE), Halogen-free, Silicone-free
- Colour
- Light grey (RAL 7035)
- Description
- Interchangeable thread tap chucks and carrying case for the SF 8M-22 cordless drill driver
No technical data available
- Description
- BS chucks for our diamond coring machines
- Additional accessory information
- Keyed three-jaw chuck for the DD 110-D for use with cylindrical and hexagonal shanks
- Description
- Fastener guides and accessories for the DX 5 and DX 460 powder-actuated tools
- Fastener intake
- Single nail
- For use with (tools)
- DX 460 IE, DX 5 IE
- Additional accessory information
- Fastener guide for DX 5 / DX 460 (long)
- Description
- Tripods and measuring rods compatible with rotating lasers
- Additional accessory information
- Metric (cm) telescopic staff with a maximum height of 16' (4.88 m) and scale on the front and rear. High-grade, fibreglass-reinforced plastic, suitable for outdoor applications
- For use with (local pick)
- PR 2-HS, PR 30-HVS, PR 300-HV2S
- Max. Height
- 5000 mm
- Description
- Tripods and measuring rods compatible with rotating lasers
- For use with (local pick)
- PR 2-HS, PR 30-HVS, PR 300-HV2S
- Max. Height
- 2400 mm
- Description
- Tripods and measuring rods compatible with rotating lasers
- Additional accessory information
- Made from aluminium, adjustable in height between 1 m and 5 m, weight 1.92 kg
- For use with (local pick)
- PR 2-HS, PR 30-HVS, PR 300-HV2S
- Max. Height
- 5000 mm
- Description
- Accessories
- Accessory type
- Fastening elements
- Additional accessory information
- M12 clamping spindle for compact base plates (total length 125 mm)
- Description
- Optional extras/spare parts for DWS 225 long-neck plasterboard sanders
No technical data available
ultimate
- Description
- Ultimate-performance collated nails for fastening to steel using the BX 4 cordless nailer
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 4 mm
- Environmental conditions
- Dry indoor
ultimate
- Description
- Ultimate-performance collated nails for fastening to steel using the BX 3 cordless nailer
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 4 mm
- Corrosion protection
- Galvanised zinc coated <20 µm
premium
- Description
- Ultimate-performance collated nails for fastening to steel using the GX 3 gas nailer
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 4 mm
- Corrosion protection
- Galvanised zinc coated <20 µm
ultimate
- Description
- Ultimate-performance collated nails for fastening to steel using the GX 120 gas nailer
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 4 mm
- Corrosion protection
- Galvanised zinc coated <20 µm
- Description
- Software to assist the planning of sealing and fire protection around cables and pipes, in addition to a 3D PDMS Library
- Supported operating system
- Windows 10, Windows 7
- Security and authorizations
- Hilti-signed software
- Description
- Foam positioning aid to centre and align glass panes in the metal shoe, for use with the HIT-HY 270 adhesive anchor
No technical data available
- Description
- BS chucks for our diamond coring machines
- Additional accessory information
- Keyless three-jaw chuck for the DD 110-D for use with cylindrical and hexagonal shanks
- Description
- Grinding hood for grinding chamfers into concrete edges with DGH 130
- Accessory type
- Dust extraction hoods
- Description
- Grinding hood for grinding chamfers into concrete edges with DGH 130
- Accessory type
- Dust extraction hoods
- Description
- Grinding hood for grinding chamfers into concrete edges with DGH 130
- Accessory type
- Dust extraction hoods
premium
- Description
- Bright profiled framing nail for fastening wood to wood with the GX 90-WF nailer
- Base materials
- Wood
- Environmental conditions
- Dry indoor
- Collation type
- 34 degree paper collated
premium
- Description
- Bright, smooth framing nail for fastening wood to wood with the GX 90-WF nailer
- Base materials
- Wood
- Environmental conditions
- Dry indoor
- Collation type
- 34 degree paper collated
premium
- Description
- Galvanised, smooth framing nail for fastening wood to wood with the GX 90-WF nailer
- Base materials
- Wood
- Corrosion protection
- Galvanised zinc coated <20 µm
- Environmental conditions
- Dry indoor, Indoor with temporary condensation
premium
- Description
- Galvanised, profiled framing nail for fastening wood to wood with the GX 90-WF nailer
- Base materials
- Wood
- Corrosion protection
- Galvanised zinc coated <20 µm
- Environmental conditions
- Dry indoor, Indoor with temporary condensation
- Description
- Receivers and target plates for multi-directional lasers
- Additional accessory information
- Significantly improves the visibility of the green laser beam. The magnetic target plate attaches perfectly to the metal frame, freeing both hands for easy levelling of the suspended ceiling
- Description
- Remote/receivers and holders for your Hilti PR rotating lasers
No technical data available
- Description
- Remote/receivers and holders for your Hilti PR rotating lasers
No technical data available
- Description
- Receivers and target plates for multi-directional lasers
- For use with (local pick)
- PD-CS, PD-E, PD-I, PD-S
standard
- Description
- Collated nails for fastening to concrete and other base materials using the GX 120 gas nailer
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 60 mm
- Corrosion protection
- Galvanised zinc coated <20 µm
premium
- Description
- Stainless steel profiled framing nail for fastening wood to wood with the GX 90-WF nailer
- Base materials
- Wood
- Corrosion protection
- Stainless steel A2
- Environmental conditions
- Dry indoor, Indoor with temporary condensation, Outdoor temporary applications, Outdoor with low pollution, Outdoor with moderate concentration of pollution