Concrete saws
Find out how our hand-held cut-off saws, concrete cutters and slitting tools are designed for faster cutting in concrete, masonry, and metal
8 Products

- Description
- Compact top-handle battery cut-off saw, for cutting up to 120 mm with 300 mm blades in concrete, masonry and metal (Nuron battery platform)
- Base materials
- All types of concrete and brick, All types of masonry (hollow brick, sand-lime block, etc.), Asphalt, Steel, Mineral
- Dimensions (LxWxH)
- 660 x 290 x 350 mm
- Protection class
- IEC Battery operated



- Description
- Versatile rear-handle battery cut-off saw, for cutting up to 120 mm with 300 mm blades in concrete, masonry and metal (Nuron battery platform)
- Base materials
- All types of concrete and brick, All types of masonry (hollow brick, sand-lime block, etc.), Asphalt, Steel, Mineral
- Dimensions (LxWxH)
- 740 x 290 x 350 mm
- Protection class
- IEC Battery operated



- Description
- Compact top-handle petrol saw (63cc) with blade brake, for cutting up to 120 mm with 300 mm blades in concrete, masonry and metal
- Motor cylinder
- 63.3 cm³
- Rated power
- 3.2 kW
- Wet or dry operation
- Wet and dry


- Description
- Versatile rear-handle 70 cc petrol saw with auto-choke – cutting depth up to 125 mm
- Motor cylinder
- 68.7 cm³
- Rated power
- 3.5 kW
- Wet or dry operation
- Wet and dry


- Description
- Powerful, easy-start 87 cc petrol saw with auto-choke – max. blade diameter 400 mm for cutting depth up to 150 mm
- Motor cylinder
- 87 cm³
- Rated power
- 4.3 kW
- Wet or dry operation
- Wet and dry


- Description
- Wet and dry electric hand-held diamond cutter – cutting depth up to 120 mm with 305 mm blades
- Disc diameter
- 305 mm
- Cutting depth
- 120 mm
- No load RPM
- gear 1: 4900 rpm



- Description
- Dry electric hand-held diamond cutter – cutting depth up to 85 mm with 230 mm blade
- Disc diameter
- 230 mm
- Cutting depth
- 80 mm
- No load RPM
- gear 1: 6500 rpm



- Description
- Slitting machine for wall/floor chasing and cable, conduit or pipe installations in a variety of base materials
- Cutting depth
- 50 mm
- Max. cutting width
- 50 mm
- Disc diameter
- 150 mm


Battery cut-off saws
The performance and feel of petrol cut-off saws without the hassle
What if you could forget about fumes, noise and fuel-mix issues? And what if flooded engines and broken pull cords were a thing of the past?
When you use our cut-off saws on the Nuron platform together with blades that we've optimised for speed and run time, you can get the same work done as with 60cc and 70cc petrol cut-off saws – minus the hassle and extra costs.
Why choose Hilti battery cut-off saws?

Advanced safety features
Our 3D Active Torque Control (ATC) technology shuts the tool down in less than a second in case of kickback, or when the tool is dropped

Feel and performance of gas
Improved power distribution means you get the feel and performance as 60cc and 70cc petrol saws

More cuts per charge
Maximise your run time – with 2x2 B22-255 batteries the DSH 700-22 can cut as much concrete as with a full tank of petrol

Lower running costs
Get virtually maintenance-free tools with up to double the life of petrol cut-off saws. Plus you can say goodbye to fuel-related costs.

Safer cutting work
Protect your crews against kickback and exposure to dust
- Unique 3D Active Torque Control (ATC) stops unexpected tool kickback in < 1 second
- Extremely fast-acting blade brake: stops disc spinning < 4 seconds after trigger release
- Intuitive digital on/off switch: press twice to turn tool off. After 60 seconds the tool automatically shuts down.
- Cut dust exposure to allowed limits with our DWP 15-22 battery water pump when outdoors – or indoors where allowed. Or cut dust exposure by up to 50% with our dedicated DSH-DRS dust removal system (DRS).
- Vibration lower than <2.5m/s2: Active Vibration Technology (AVR) as standard

Power meets flexibility with the DSH 600-22
More manoeuvrability for jobs from paving work to metal cutting
The DSH 600-22 gives you the power you need for quicker cuts up to 120mm using a 300mm blade – all in a tool built light enough for comfortable handing in any direction.
Doing jobs where tool weight is critical? Use 2x2 B 22-170 Nuron batteries. Need more run time? Use 2x2 B 22-255 Nuron batteries to cut as much concrete as with a full tank of petrol.

Hit the ground running with the DSH 700-22
Petrol-like performance for jobs from cutting concrete slabs to metal deck
For heavier duty jobs choose the DSH 700-22 battery cut-off saw. The DSH 700-22 comes with a rear handle for extra comfort during floor-focused tasks. And when you pair the tool with our specially designed blades you'll get performance similar to a 70cc petrol-cut off saw.

Blades built for your cut-off saw
Diamond blades and cutting discs optimised for battery tools
The SPX Universal A diamond blade has been specially developed by Hilti for optimal cutting speed and cuts per charge when cutting concrete and masonry. With a 300 mm diameter and a thinner blade core, it uses less power during cutting so you can work longer between recharges.
For best performance when cutting metal, use our durable and powerful SPX metal cutting disc.

Cut concrete...and tool costs
Get lower running costs and a longer lifespan for your cut-off saw
No one likes to spend extra money. Here's how using our battery cut-off saws can help you save on tool costs:
- Elimination of costs associated with fuel, including purchase, storage and transport
- Almost no maintenance costs because battery-cut off saws have fewer wearable parts than petrol saws
- Up to double the tool lifespan thanks to a brushless electric motor

Save on CO2 emissions with battery cut-off saws
The same cutting power as our petrol saws in a more sustainable tool
Our DSH 600-22 battery cut off saw and DSH 600-X petrol cut-off saw have almost the same CO2 footprint at time of purchase. But after just 33 hours of use, the DSH 600-22 comes out ahead.* And the annual saving in CO2 emissions for the DSH 600-22 is over one tonne a year, making battery cut off saws the more sustainable choice.
* Based on use of 4 B255-batteries and 2 C8-22 230V chargers for 6 hours a week and 2.4 tank refills per hour for the DSH 600-X