Accessories
Accessories for modular pipe support systems – threaded rods, hexagonal nuts, screws, bolts, adapters and washers
All prices discounted net
An error occurred
Unfortunately, products matching your chosen category can not be loaded, due to technical issues. Please try again later. Thank you for your understanding.
No products matching your requirements
Unfortunately, there are no products matching your requirements. Please udpate or reset your applied filters.
All prices discounted net
- Material composition: Steel grade 4.8 - DIN 976-1
- Surface finish: Galvanized
Galvanised threaded studs with 4.6 steel grade used as an accessory for various applications
- Material composition: Steel grade 4.6
- Surface finish: Galvanized
Galvanised grade 8 hexagon nut corresponding to DIN 934
- Material composition: Steel grade 8
- Surface finish: Galvanized
Galvanised hex nut with flange corresponding to DIN 6923 8
- Material composition: Steel grade 8
- Surface finish: Galvanized
Galvanised wedge nut used for fastening threaded rods to metal decks
- Surface finish: Galvanized
Galvanised flat washer corresponding to ISO 7089
- Material composition: Steel - DIN EN ISO 7089
- Surface finish: Galvanized
- Material composition: Steel - DIN EN ISO 7093-1
- Surface finish: Galvanized
Flat washer similar to ISO 7089
- Material composition: Steel
- Surface finish: Galvanized
- Load range: Medium-duty
Galvanised hexagon screw corresponding to DIN 933
- Material composition: Steel grade 8.8
- Surface finish: Galvanized
- Load range: Medium-duty
Hot-dip galvanised (HDG) threaded rod with 4.8 steel grade
- Material composition: Steel grade 4.8
- Surface finish: Hot-dip galvanized
- Base material type: n/a
Hot-dip galvanised (HDG) grade 8 hexagon nut corresponding to DIN 934
- Material composition: Steel grade 8
- Surface finish: Hot-dip galvanized - DIN EN ISO 10684
- Base material type: n/a
Hot-dip galvanised (HDG) flat washer corresponding to ISO 7089
- Material composition: Steel - DIN EN ISO 7089
- Surface finish: Hot-dip galvanized
Hot-dip galvanised (HDG) flat washer corresponding to ISO 7093 used in various applications
- Material composition: Steel - DIN EN ISO 7093-1
- Surface finish: Hot-dip galvanized
Stainless steel (A4) pre-cut lengths of threaded rod
- Thread - M: M10
- Required material grade: A2, A4
- Material composition: Stainless steel A4-70 - DIN EN ISO 3506-1
Stainless steel (A2) hexagon nut corresponding to DIN 934
- Required material grade: A2
- Material composition: Stainless steel A2-70
- Surface finish: Stainless steel
Stainless steel (A4) hexagon nut corresponding to DIN 934
- Required material grade: A2, A4
- Material composition: Stainless steel A4-70
- Surface finish: Stainless steel
Stainless steel (A2) flat washer corresponding to ISO 7089
- Required material grade: A2
- Material composition: Stainless steel A2 – DIN EN ISO 7089
- Surface finish: Stainless steel
Stainless steel (A4) flat washer corresponding to ISO 7089
- Required material grade: A2, A4
- Material composition: Stainless steel A4 – DIN EN ISO 7089
- Surface finish: Stainless steel
Stainless steel (A4) flat washer corresponding to ISO 7093 used in various applications
- Required material grade: A2, A4
- Material composition: Stainless steel A4 – DIN EN ISO 7093-1
- Surface finish: Stainless steel
Flat washer similar to ISO 7089 (A4 stainless steel)
- Required material grade: A2, A4
- Material composition: Stainless steel A4
- Surface finish: Stainless steel
Stainless steel (A2) hexagon screw corresponding to DIN 933
- Required material grade: A2
- Material composition: Stainless steel A2-70
- Surface finish: Stainless steel
Stainless steel (A4) hexagon screw corresponding to DIN 933
- Required material grade: A4
- Material composition: Stainless steel A4-70 - DIN EN ISO 3506-1
- Surface finish: Stainless steel
Hot-dip galvanised (HDG) hexagon screw corresponding to DIN 933
- Material composition: Steel grade 8.8
- Surface finish: Hot-dip galvanized
- Load range: Medium-duty
Galvanised thread adapters to connect various internal and external thread diameters
- Material composition: Steel grade 4.6
- Surface finish: Galvanized
Galvanised threaded pipe with 4.6 steel grade used as an accessory for various applications
- Material composition: Steel grade 4.6
- Surface finish: Galvanized
- Length - L: 2000 mm
Hot-dip galvanised (HDG) threaded pipe with 4.8 steel grade used as an accessory for various applications
- Material composition: Steel grade 4.6
- Surface finish: Hot-dip galvanized
- Length - L: 1000 mm
Galvanised hanger bolt with steel grade 4.6 and Torx head
- Thread - M: M8
- Material composition: Steel grade 4.6
- Surface finish: Galvanized
Hot-dip galvanised (HDG) hexagon bolt used in various applications
- Thread - M: M12
- Material composition: Steel grade 8.8
- Surface finish: Hot-dip galvanized, 45 µm
- Material composition: Malleable cast iron
- Surface finish: Galvanized
- Diameter - D: 12 mm
Galvanised hexagonal coupling nut for extending threaded rods
- Material composition: Steel grade 4.6
- Surface finish: Galvanized
Galvanised round coupling nut for extending threaded rods
- Thread - M: M16
- Material composition: Steel
- Surface finish: Galvanized
Stainless steel (A4) coupling nut for extending threaded rods
- Required material grade: A2, A4
- Material composition: Stainless steel A4-70
- Surface finish: Stainless steel
Hot-dip galvanised (HDG) coupling nut for extending threaded rods
- Material composition: Steel grade 4.6
- Surface finish: Hot-dip galvanized
- Base material type: n/a
Galvanised angles to increase stiffness while supporting pipe rings in riser shafts
- Material composition: S235JR - DIN EN 10025
- Surface finish: Galvanized
- Load range: Medium-duty
- Material composition: Steel C 60 - DIN EN 10132-3
- Surface finish: Zinc flake
- Inside diameter - DI: 16.4 mm
Galvanised pivot anchors for use in trapezoidal metal sheets
- Material composition: Carbon steel
- Surface finish: Galvanized
- Base material type: Trapezoidal sheet
Hot-dip galvanised (HDG) pipe ring saddle adapter for converting the diameter of threaded rods
- Material composition: 40Cr, GB/T 3077
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Wrench size - W: 24 mm
Stainless steel (A4) pipe ring saddle adapter for converting the diameter of threaded rods
- Required material grade: A4
- Material composition: Stainless steel, 1.4401 (A4) - EN 10088, AISI 316
- Surface finish: Stainless steel
Galvanised roll pipe ring saddle adapter for converting imperial sizes to metric
- Material composition: Steel 11SMnPb30 – DIN EN 10277-3
- Surface finish: Galvanized
- Outside thread - MA: M16
Tool to easily cut threaded rods of various diameters
- Material composition: Steel
- Surface finish: Painted
Zinc spray to help protect exposed steel against corrosion
- Content per can/cartridge: 400 ml
- Material composition: Zinc (> 90%)
- Surface finish: Zinc-like shine
Summary:
Accessories for modular pipe support systems – threaded rods, hexagonal nuts, screws, bolts, adapters and washers