Heavy-duty channel system (MIQ)

Heavy-duty channel system with integrated MQ profile for easier pipe connectivity

Overview
More details

An error occurred

Unfortunately, products matching your chosen category can not be loaded, due to technical issues. Please try again later. Thank you for your understanding.

No products matching your requirements

Unfortunately, there are no products matching your requirements. Please udpate or reset your applied filters.

MIQ New

Girder

Height: 90 mm
Material composition: S275JR - EN 10025
Surface finish: Hot-dip galvanized, 65 µm - ASTM A123

From £184.50

Compare (1)

MIQC-C New

Hot-dip galvanised (HDG) baseplate for fastening MIQ girders to concrete for heavy-duty applications

Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
Surface finish: Hot-dip galvanized 55 µmDIN EN ISO 1462
Tightening torque: 84 Nm

From £64.00

Compare (1)

MIQC-S New

Hot-dip galvanised (HDG) baseplate for fastening MIQ girders to steel for heavy-duty applications

Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
Surface finish: Hot-dip galvanized 55 µmDIN EN ISO 1462

From £144.02

Compare (1)

MI-SGC M12

Hot-dip galvanised (HDG) single beam clamp for connecting MIQ steel baseplates to steel beams

Thread - M: M12
Weight: 0.36 kg
Material composition: Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-6 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel

£141.76

Compare (1)

MI-DGC

Hot-dip galvanised (HDG) double beam clamp for connecting MI girders to steel beams for heavy-duty applications

Material composition: Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-6 - DIN EN 1562; U-bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 84 Nm

From £104.00

Compare (1)

AM

Hot-dip galvanised (HDG) threaded rod with 4.8 steel grade used as an accessory for various applications

Material composition: Steel grade 4.8
Surface finish: Hot-dip galvanized
Base material type: n/a

From £23.50

Compare (1)

MIQC-L New

Hot-dip galvanised (HDG) medium-duty connectors to connect two MIQ girders

Weight: 0.65 kg
Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
Surface finish: Hot-dip galvanized 55 µmDIN EN ISO 1462

£166.00

Compare (1)

MIQC-H New

Hot-dip galvanised (HDG) heavy-duty connectors to connect two MIQ girders

Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
Surface finish: Hot-dip galvanized 55 µmDIN EN ISO 1462
Set: Yes

From £125.00

Compare (1)

MIQC-E New

Hot-dip galvanised (HDG) connector used to connect MIQ girders longitudinally for long spans in heavy-duty applications

Weight: 3.48 kg
Material composition: DD11 MOD - HN 547, S275JR - DIN EN 10025
Surface finish: Hot-dip galvanized 55 µm DIN EN ISO 1462

£224.00

Compare (1)

MIQC-SC New

Hot-dip galvanised (HDG) connector used with MIQ baseplates that allow for free positioning of the girder

Weight: 0.79 kg
Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
Surface finish: Not galvanized

£29.00

Compare (1)

MIQA-T New

T-head bolt

Tightening torque: 84 Nm
Material composition: Bolt: grade 8.8 - DIN EN ISO 898, Plastic: PBT
Surface finish: Hot-dip galvanized, 45 µm - DIN EN ISO 1461

£116.50

Compare (1)

MIQM New

Wing nut

Material composition: Nut: C4C - DIN EN 10263, Plastic: PA 6.6
Surface finish: Hot-dip galvanized, 56 µm - ASTM A153

From £82.50

Compare (1)

MQA-F

Hot-dip galvanised (HDG) pipe clamp saddle for connecting threaded components to MQ strut channels

Material composition: Nut: EN-GJMW-450-7 - DIN EN 1562, Plate: S235JR - DIN EN 10025, Plastic: PB
Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
For use with: MQ channels

From £73.00

Compare (1)

MIA-BO

Hot-dip galvanised (HDG) U-bolt for fastening pipe shoes to MI girders

Material composition: U-bolt: DD11 MOD - HN 547, S235JR - DIN EN 10025; nut: 8 grade steel
Surface finish: HDG: 45 µm - DIN EN ISO 1461
Tightening torque: 84 Nm

From £124.00

Compare (1)

MIC-PS/MIC-PSP

Hot-dip galvanised (HDG) connector for fastening pipe shoes to MI girders for heavy-duty applications with expansion

Material composition: U-bolt, plate: DD11 MOD - HN 547, S235JR - DIN EN 10025; nut: 8 grade steel
Surface finish: HDG: U-bolt, nut 45 µm - DIN EN ISO 1461; plate: 55 µm - DIN EN ISO 1461

From £5.85

Compare (1)

MI-UB

U-bolt

Material composition: U-bolt: DD11 MOD - HN 547, S235JR - DIN EN 10025; nut: 8 grade steel; washer: DIN EN ISO 7093-1-200HV
Surface finish: HDG: 45 µm - DIN EN ISO 1461

From £53.40

Compare (1)

MIC-UB

U-bolt connector

Surface finish: HDG: connector, square washer 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
Wrench size: 19 mm

From £105.00

Compare (1)

MRG 2,0-F

Premium hot-dip galvanised (HDG) roll connector for medium-duty heating and refrigeration applications

Thread - M: M10, M12
Height - H: 31 mm
Maximum load - F: 1.5 kN

£200.00

Compare (1)

MIA-EH

Easy hand screw

Material composition: Bolt: 8.8 grade steel; toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562
Surface finish: HDG: 45 µm - DIN EN ISO 1461
Tightening torque: 84 Nm

From £44.00

Compare (1)

M12-F-SL-WS 3/4"

Prevailing torque hex nut

Weight: 0.02 kg
Material composition: Steel grade 8
Surface finish: HDG: 45 µm - DIN EN ISO 1461

£100.00

Compare (1)

MIA-TP

Hot-dip galvanised (HDG) tooth plate used with the MIA-OH bolt for fastening of MI and MIQ connectors

Weight: 0.06 kg
Material composition: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562
Surface finish: HDG: 45 µm - DIN EN ISO 1461

£39.40

Compare (1)

MIA-EH-P

Hot-dip galvanised (HDG) plate for easier fastening and one-handed adjustment of MI and MIQ connectors

Weight: 0.29 kg
Material composition: Plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; spring: 1.4319 AISI 302, 1.4310 DIN EN 10088
Surface finish: HDG: 45 µm - DIN EN ISO 1461

£57.10

Compare (1)