Heavy-duty channel system (MIQ)
Heavy-duty channel system with integrated MQ profile for easier electrical installations
All prices discounted net
An error occurred
Unfortunately, products matching your chosen category can not be loaded, due to technical issues. Please try again later. Thank you for your understanding.
No products matching your requirements
Unfortunately, there are no products matching your requirements. Please udpate or reset your applied filters.
All prices discounted net
- Height: 90 mm
- Material composition: S275JR - EN 10025
- Surface finish: Hot-dip galvanised, 65µm – DIN EN ISO 1461
- Material composition: Nut: C4C - DIN EN 10263, Plastic: PA 6.6
- Surface finish: Hot-dip galvanized, 55 µm - DIN EN ISO 1461
Hot-dip galvanised (HDG) baseplate for fastening MIQ girders to concrete for heavy-duty applications
- Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized 55 µmDIN EN ISO 1462
- Tightening torque: 84 Nm
Hot-dip galvanised (HDG) baseplate for fastening MIQ girders to steel for heavy-duty applications
- Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized 55 µmDIN EN ISO 1462
Hot-dip galvanised (HDG) medium-duty connectors to connect two MIQ girders
- Weight: 0.65 kg
- Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized 55 µmDIN EN ISO 1462
Hot-dip galvanised (HDG) heavy-duty connectors to connect two MIQ girders
- Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized 55 µmDIN EN ISO 1462
- Set: Yes
Hot-dip galvanised (HDG) connector used to connect MIQ girders longitudinally for long spans in heavy-duty applications
- Weight: 3.48 kg
- Material composition: DD11 MOD - HN 547, S275JR - DIN EN 10025
- Surface finish: Hot-dip galvanized 55 µm DIN EN ISO 1462
Hot-dip galvanised (HDG) connector used with MIQ baseplates that allow for free positioning of the girder
- Weight: 0.79 kg
- Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish: Not galvanized
Hot-dip galvanised (HDG) single beam clamp for connecting MIQ steel baseplates to steel beams
- Thread connection - M: M12
- Weight: 0.36 kg
- Material composition: Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-6 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel
Hot-dip galvanised (HDG) double beam clamp for connecting MI girders to steel beams for heavy-duty applications
- Material composition: Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-6 - DIN EN 1562; U-bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish: HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
Galvanised beam clamp for connecting MQ strut channels directly to steel beams
- Material composition: Claw plate: S235JR - DIN EN 10025, U-bolt: S235JRG2 - DIN EN 10025, Nut - DIN 50961
- Surface finish: Electrogalvanized - for dry indoor use only
- Material composition: Bolt: 8.8 grade steel; toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562
- Surface finish: HDG: 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
Prevailing torque hex nut
- Weight: 0.02 kg
- Material composition: Steel grade 8
- Surface finish: HDG: 45 µm - DIN EN ISO 1461
Hot-dip galvanised (HDG) tooth plate used with the MIA-OH bolt for fastening of MI and MIQ connectors
- Weight: 0.06 kg
- Material composition: S235 - EN 10025-2
- Surface finish: HDG: 45 µm - DIN EN ISO 1461
Hot-dip galvanised (HDG) plate for easier fastening and one-handed adjustment of MI and MIQ connectors
- Weight: 0.29 kg
- Material composition: Plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; spring: 1.4319 AISI 302, 1.4310 DIN EN 10088
- Surface finish: HDG: 45 µm - DIN EN ISO 1461
Girder end cap for safer and neater covering of MI and MIQ girder ends
- Material composition: Moplen EP 240H
- Temperature resistance: -30 - 90 °C
Summary:
Heavy-duty channel system with integrated MQ profile for easier electrical installations