Hot-dip galvanized
Hot-dip galvanised modular channel systems for the installation of pipe supports, ventilation ducts and cable trays in moderately corrosive environments. Designed specifically for greater flexibility and ease-of-use
All prices discounted net
An error occurred
Unfortunately, products matching your chosen category can not be loaded, due to technical issues. Please try again later. Thank you for your understanding.
No products matching your requirements
Unfortunately, there are no products matching your requirements. Please udpate or reset your applied filters.
All prices discounted net
Hot-dip galvanised (HDG) 21 mm high MQ strut channel for light-duty applications
- Height: 20.6 mm
- Material thickness: 2 mm
- Material composition: S235JR - DIN EN 10025
Hot-dip galvanised (HDG plus) 21 mm high MQ strut channel for light-duty applications
- Height: 20.6 mm
- Material thickness: 2 mm
- Material composition: S235JR - DIN EN 10025
Hot-dip galvanised (HDG) MQ installation double channel for medium-duty applications
- Height: 41.2 mm
- Material thickness: 2 mm
- Material composition: S250GD - DIN EN 10346
Hot-dip galvanised (HDG plus) MQ installation double channel for medium-duty applications
- Height: 41.2 mm
- Material thickness: 2 mm
- Material composition: S235JR - DIN EN 10025
Hot-dip galvanised (HDG) MQ installation channel for medium-duty applications
- Height: 41.3 mm
- Material thickness: 2 mm
- Material composition: S235JR - DIN EN 10025
Hot-dip galvanised (HDG plus) MQ installation double channel for medium-duty applications
- Height: 41.3 mm
- Material thickness: 2 mm
- Material composition: S235JR - DIN EN 10025
Hot-dip galvanised (HDG) MQ installation double channel for medium-duty applications
- Height: 82.6 mm
- Material thickness: 2 mm
- Material composition: S250GD - DIN EN 10346
Hot-dip galvanised (HDG plus) MQ installation double channel for medium-duty applications
- Height: 82.6 mm
- Material thickness: 2 mm
- Material composition: S235JR - DIN EN 10025
Hot-dip galvanised (HDG) 52 mm high MQ strut channel for medium/heavy-duty applications
- Height: 52 mm
- Material thickness: 2.5 mm
- Material composition: S235JR - DIN EN 10025
Hot-dip galvanised (HDG) MQ installation double channel for medium/heavy-duty applications
- Height: 124 mm
- Material thickness: 2.5 mm, 2.75 mm
- Material composition: S250GD - DIN EN 10346
Hot-dip galvanised (HDG) 72 mm high MQ strut channel for medium/heavy-duty applications
- Height: 72 mm
- Material thickness: 2.75 mm
- Material composition: S235JR - DIN EN 10025
Hot-dip galvanised (HDG) MQ installation double channel for medium/heavy-duty applications
- Height: 124 mm
- Material thickness: 3 mm
- Material composition: S250GD - DIN EN 10346
Hot-dip galvanised (HDG) double bracket for medium-duty applications
- Material thickness: Channel: 2 mm, Baseplate: 8 mm
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
Hot-dip galvanised (HDG) bracket with a 41 mm high, single MQ strut channel for medium-duty applications
- Material thickness: Channel: 2 mm, Baseplate: 8 mm
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
Hot-dip galvanised (HDG) angle brace for brackets
- Material thickness: 3 mm
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
Hot-dip galvanised (HDG) pipe clamp saddle for connecting threaded components to MQ strut channels
- Material composition: Nut: EN-GJMW-450-7 - DIN EN 1562, Plate: S235JR - DIN EN 10025, Plastic: PB
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- For use with: MQ channels
Hot-dip galvanised (HDG) wing nut for connecting modular support system components
- Tightening torque: 40 Nm
- Thread connection - M: M12
- Material composition: Wings: plastic PA, Nut: C4C - DIN EN 10263
Hot-dip galvanised (HDG plus) wing nut for connecting modular support system components
- Material composition: Wings: plastic PA, Nut: QStE 380 TM, SEW 92
- Surface finish: Multi-layer coating
- For use with: MQ channels
Hot-dip galvanised (HDG) bored plate for trapeze assembly and anchoring
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
Hot-dip galvanized (HDG) 90-degree angle for connecting multiple MQ strut channels
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
Hot-dip galvanised (HDG) 45- or 135-degree angle for connecting multiple MQ strut channels
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
Hot-dip galvanised (HDG) 90-degree heavy angle for connecting multiple MQ strut channels in medium/heavy-duty applications
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
Hot-dip galvanised channel connector used as a longitudinal extender for MQ strut channels
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
Hot-dip galvanised (HDG) flat plate connector used for joining channels at right angles
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
Hot-dip galvanised channel foot for fastening strut channels to concrete
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
Hot-dip galvanised (HDG) channel connector for two-dimensional structures
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
Hot-dip galvanised (HDG) channel connector for three-dimensional structures
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
Hot-dip galvanised (HDG) channel foot for fastening channels to concrete in light/medium-duty applications
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
Hot-dip galvanised (HDG) channel foot for fastening channels to concrete at an angle
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
Hot-dip galvanised (HDG) channel foot for fastening channels to concrete
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
Hot-dip galvanised channel foot for fastening channels to different base materials at an angle
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
Hot-dip galvanised (HDG) beam clamp for connecting MQ strut channels directly to steel beams
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
Hot-dip galvanised (HDG) beam clamp for connecting MQ strut channels directly to steel beams
- Material composition: U-bolt: S235JRG2 - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
Hot-dip galvanised (HDG) elements for assembling 3D structures on site
- Wrench size: 17 mm
- Tightening torque: 40 Nm
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
Hot-dip galvanised (HDG) clamp for cross-connection of one MQ strut channel to another
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
Hot-dip galvanised (HDG) channel tie to create double channels
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Wrench size: 13 mm
- Material composition: Steel grade 8.8
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Weight: 47 g
- Material composition: Structural steel with minimum yield strength of 235 N/mm2
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
- Surface finish: n/a
- Weight: 7 g
- Height: 90 mm
- Material composition: S275JR - EN 10025
- Surface finish: Hot-dip galvanised, 65µm – DIN EN ISO 1461
Hot-dip galvanised (HDG) baseplate for fastening MIQ girders to concrete for heavy-duty applications
- Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized 55 µmDIN EN ISO 1462
- Tightening torque: 84 Nm
Hot-dip galvanised (HDG) baseplate for fastening MIQ girders to steel for heavy-duty applications
- Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized 55 µmDIN EN ISO 1462
Hot-dip galvanised (HDG) double beam clamp for connecting MI girders to steel beams for heavy-duty applications
- Material composition: Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-6 - DIN EN 1562; U-bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish: HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
Hot-dip galvanised (HDG) single beam clamp for connecting MIQ steel baseplates to steel beams
- Thread connection - M: M12
- Weight: 0.36 kg
- Material composition: Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-6 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel
Hot-dip galvanised (HDG) medium-duty connectors to connect two MIQ girders
- Weight: 0.65 kg
- Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized 55 µmDIN EN ISO 1462
Hot-dip galvanised (HDG) heavy-duty connectors to connect two MIQ girders
- Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized 55 µmDIN EN ISO 1462
- Set: Yes
Hot-dip galvanised (HDG) connector used to connect MIQ girders longitudinally for long spans in heavy-duty applications
- Weight: 3.48 kg
- Material composition: DD11 MOD - HN 547, S275JR - DIN EN 10025
- Surface finish: Hot-dip galvanized 55 µm DIN EN ISO 1462
Hot-dip galvanised (HDG) connector used with MIQ baseplates that allow for free positioning of the girder
- Weight: 0.79 kg
- Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish: Not galvanized
- Tightening torque: 84 Nm
- Material composition: Bolt: grade 8.8 - DIN EN ISO 898, Plastic: PBT
- Surface finish: Hot-dip galvanized, 45 µm - ISO 10684
- Material composition: Nut: C4C - DIN EN 10263, Plastic: PA 6.6
- Surface finish: Hot-dip galvanized, 55 µm - DIN EN ISO 1461
Hot-dip galvanised (HDG) installation girders with greater adjustability for heavy-duty applications
- Material composition: DD11 MOD – HN 555-4, S235JR – EN10025-2
- Surface finish: Hot-dip galvanised, 75µm - DIN EN ISO 1461
Hot-dip galvanised (HDG) bracket for heavy-duty connections to concrete
- Material composition: Hot-dip galvanised acc. to DIN EN ISO 1461
- Surface finish: HDG: min 55 µm
Hot-dip galvanised (HDG) bracket for heavy-duty connections to concrete
- Material composition: Hot-dip galvanised acc. to DIN EN ISO 1461
- Surface finish: HDG: min 55 µm
Hot-dip galvanised (HDG) bracket for heavy-duty connections to steel
- Material composition: Hot-dip galvanised acc. to DIN EN ISO 1461
- Surface finish: HDG: min 55 µm
Hot-dip galvanised (HDG) bracket for heavy-duty connections to steel
- Material composition: Hot-dip galvanised acc. to DIN EN ISO 1461
- Surface finish: HDG: min 55 µm
- Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish: HDG: 75 µm - ASTM A123
Hot-dip galvanised (HDG) baseplate for fastening MI-90 girders to concrete using two anchors
- Weight: 3.49 kg
- Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
- Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
Connector for fastening MI girders to concrete
- Weight: 2.45 kg
- Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
- Weight: 4.37 kg
- Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
Hot-dip galvanised (HDG) baseplate for fastening MI-90 girders to steel for heavy-duty applications
- Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
Hot-dip galvanised (HDG) baseplate for fastening MI-120 girders to steel for heavy-duty applications
- Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
Hot-dip galvanised (HDG) baseplate for fastening MI girders to steel
- Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish: HDG: min 55 µm - DIN EN ISO 1461
Hot-dip galvanised (HDG) single beam clamp for connecting MI steel baseplates to steel beams
- Thread connection - M: M16
- Weight: 0.51 kg
- Surface finish: HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
- Wrench size: 19 mm
Hot-dip galvanised (HDG) connector for fastening girders directly to concrete at angles between 0 and 180 degrees
- Weight: 2.26 kg
- Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
- Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish: None (primer coating, basic connector)
Standard hot-dip galvanised (HDG) connector for fastening MI girders to one another
- Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; backing plate, toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; backing plate, toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
Ultimate hot-dip galvanised (HDG) connectors offering highest versatility within the MI modular system
- Weight: 2.23 kg
- Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; backing plate, toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Backing plate, Tooth plate, Bolt, Nut 45 µm - DIN EN ISO 1461
Hot-dip galvanised (HDG) connector for fastening MI girders perpendicularly to one another
- Weight: 2.2 kg
- Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
Hot-dip galvanised (HDG) connector for fastening MI girders perpendicularly to one another
- Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; backing plate, toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; backing plate, toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
- Weight: 4.84 kg
- Material composition: C30 - DIN EN 10250-2
- Surface finish: HDG: 55 µm - DIN EN ISO 1461
Hot-dip galvanised (HDG) multi-angle connector used with MIC-MAH connectors for fastening MI girders to one another at an angle
- Weight: 2.63 kg
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
- Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
- Wrench size: 19 mm
Girder end cap for safer and neater covering of MI and MIQ girder ends
- Material composition: Moplen EP 240H
- Temperature resistance: -30 - 90 °C
Hot-dip galvanised (HDG) screw for easier fastening and one-handed adjustment of MI and MIQ connectors
- Material composition: Steel grade 8.8
- Surface finish: HDG: 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
- Material composition: Bolt: 8.8 grade steel; toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562
- Surface finish: HDG: 45 µm - DIN EN ISO 1461
- Tightening torque: 84 Nm
Prevailing torque hex nut
- Weight: 0.02 kg
- Material composition: Steel grade 8
- Surface finish: HDG: 45 µm - DIN EN ISO 1461
Hot-dip galvanised (HDG) tooth plate used with the MIA-OH bolt for fastening of MI and MIQ connectors
- Weight: 0.06 kg
- Material composition: S235 - EN 10025-2
- Surface finish: HDG: 45 µm - DIN EN ISO 1461
Hot-dip galvanised (HDG) plate for easier fastening and one-handed adjustment of MI and MIQ connectors
- Weight: 0.29 kg
- Material composition: Plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; spring: 1.4319 AISI 302, 1.4310 DIN EN 10088
- Surface finish: HDG: 45 µm - DIN EN ISO 1461
- Weight: 0.06 kg
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt 45 µm - DIN EN ISO 1461
- Tightening torque: 24 Nm
Hot-dip galvanised (HDG) connector for fastening MQ strut channels perpendicular to MI girders
- Weight: 0.36 kg
- Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 40 µm - DIN EN ISO 10684
Hot-dip galvanised (HDG) hexagon bolt used in various applications
- Thread - M: M12
- Material composition: Steel grade 8.8
- Surface finish: Hot-dip galvanized, 45 µm
Summary:
Hot-dip galvanised modular channel systems for the installation of pipe supports, ventilation ducts and cable trays in moderately corrosive environments. Designed specifically for greater flexibility and ease-of-use