Hot-dip galvanized
Accessories for modular support systems – threaded rods, hexagonal nuts, screws, bolts, adapters and washers in a hot-dip galvanised surface finish
All prices discounted net
An error occurred
Unfortunately, products matching your chosen category can not be loaded, due to technical issues. Please try again later. Thank you for your understanding.
No products matching your requirements
Unfortunately, there are no products matching your requirements. Please udpate or reset your applied filters.
All prices discounted net
Hot-dip galvanised (HDG) threaded rod with 4.8 steel grade
- Material composition: Steel grade 4.8
- Surface finish: Hot-dip galvanized
- Base material type: n/a
Hot-dip galvanised (HDG) grade 8 hexagon nut corresponding to DIN 934
- Material composition: Steel grade 8
- Surface finish: Hot-dip galvanized - DIN EN ISO 10684
- Base material type: n/a
Hot-dip galvanised (HDG) flat washer corresponding to ISO 7089
- Material composition: Steel - DIN EN ISO 7089
- Surface finish: Hot-dip galvanized
Hot-dip galvanised (HDG) flat washer corresponding to ISO 7093 used in various applications
- Material composition: Steel - DIN EN ISO 7093-1
- Surface finish: Hot-dip galvanized
Hot-dip galvanised (HDG) hexagon screw corresponding to DIN 933
- Material composition: Steel grade 8.8
- Surface finish: Hot-dip galvanized
- Load range: Medium-duty
Hot-dip galvanised (HDG) hexagon bolt used in various applications
- Thread - M: M12
- Material composition: Steel grade 8.8
- Surface finish: Hot-dip galvanized, 45 µm
Hot-dip galvanised (HDG) pipe ring saddle adapter for converting the diameter of threaded rods
- Material composition: 40Cr, GB/T 3077
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Wrench size - W: 24 mm
Hot-dip galvanised (HDG) coupling nut for extending threaded rods
- Material composition: Steel grade 4.6
- Surface finish: Hot-dip galvanized
- Base material type: n/a
Hot-dip galvanised (HDG) threaded pipe with 4.8 steel grade used as an accessory for various applications
- Material composition: Steel grade 4.6
- Surface finish: Hot-dip galvanized
- Length - L: 1000 mm
- Material composition: Steel C 60 - DIN EN 10132-3
- Surface finish: Zinc flake
- Inside diameter - DI: 16.4 mm
Economical threaded rod for injectable hybrid/epoxy anchors (8.8 hot-dip galvanized)
- Material, corrosion: Carbon steel, HDG (hot-dip galvanised)/sherardised
- Base materials: Concrete (uncracked)
- PROFIS software: Yes
Summary:
Accessories for modular support systems – threaded rods, hexagonal nuts, screws, bolts, adapters and washers in a hot-dip galvanised surface finish