Galvanised Hardware

Accessories for modular support systems – threaded rods, hexagonal nuts, screws, bolts, adapters and washers in a galvanised surface finish

AM Galvanised threaded rod with 4.8 steel grade

AM Galvanised pre-cut lengths of threaded rod with 4.6 steel grade

AM 8.8 Threaded rod Economical threaded rod for injectable hybrid/epoxy anchors (8.8 carbon steel according to DIN 976-1)

Galvanised grade 8 hexagon nut DIN 934 Galvanised grade 8 hexagon nut corresponding to DIN 934

Galvanised hex flange nut Galvanised hex nut with flange corresponding to DIN 6923 8

Galvanised flat washer ISO 7089 Galvanised flat washer corresponding to ISO 7089

Galvanised flat washer Galvanised flat washer corresponding to ISO 7093 used in various applications

Galvanised flat washer similar to ISO 7089 Galvanised flat washer similar to ISO 7089

Galvanised hexagon screw DIN 933 Galvanised hexagon screw corresponding to DIN 933

GA Galvanised thread adapters to connect various internal and external thread diameters

GR-G Galvanised threaded pipe with 4.6 steel grade used as an accessory for various applications

Galvanised hanger bolt 4.6 Torx head Galvanised hanger bolt with steel grade 4.6 and Torx head

MF-SKD Galvanised pivot anchors for use in trapezoidal metal sheets

MRA Galvanised roll pipe ring saddle adapter for converting imperial sizes to metric

MW-MX Galvanised angles to increase stiffness while supporting pipe rings in riser shafts

RA Galvanised pipe hangers

Hex coupling nut Galvanised hexagonal coupling nut for extending threaded rods

Round coupling nut Galvanised round coupling nut for extending threaded rods

Back to products ()

Compare

Products ()