Engineering Centre

how do i check a single anchor with no profile plate i

Hello, I need fire resistance of HIT-HY200 A V3 - HAS U 8.8 M16. I could find fire resistance of HIT-HY with rebar. and the values are making sense. But in the last version of techinal data sheet there are also HIT-HY200 A V3 - HAS U 5.8 M16 Fire resistance values and I thought maybe I can use them, but the values are so so ...

What are difference HIT C and HAS U anchor bolt

how do you know when to stop injecting the mortar?

How do I upload scans from a Hilti PSA 100 to PC?

The building will have a large expanse of external decking in front of the main façade. As there will be a void below the decking, the fire engineer has asked us to provide cavity barriers between the slab and the decking at max. 20m intervals. Also, there will be electrical services running across the area below the decking, ...

The software only displays 'default' baseplate arrangements. I am looking to specify 6No fixings but the maximum available is four.

I am checking the anchor bolts, but I am getting warning (You have confirmed that your anchor plate will behave like a rigid anchor plate even with the deviation of 138%. Please be aware that the anchor design provisions are only valid for rigid anchor plates and with your deviation you might be outside of the scope of the anc...

I am looking for capacities for self drilling stainless steel fixings of a Z rail to 1.2mm thick SFS studs through a 12mm gypsum based sheathing board. The Z rail is 6mm thick stainless steel.

Hi, i am trying to design bolt/rod single embedded in concrete below connecting other concrete element above. but this bolt /rod has no base plate in it. How do i do that as when i remove base plate it appears an error and i can extract results. Please advise.