Engineering Centre

Need to drill two holes in an external wall, holes to be 202mm in diameter. What would be a suitable power drill & core drill bit for this job? Ideally handheld, but if not possible, what kind of rig would I need?

I am looking to use a S-BT-GF M8/7 stud to fix a 10mm thick plate to a deck. Would a X-FCP-R5/10 disc screw onto the top of the stud to hold the plate in place ?

We have a glazed balutrade to fix onto a hollow formed concrete floor. The manufacturers of the system we are using have tested it using Fischer FHB 11 A M12x10 bolts held in with FESHB345S resin. Is there a Hilti equivelant system to this you can advise please?

I have bought a 200l rainwater tank to be fitted on the external wall of my brick-built house. It will weigh 250kg when full. It has been suggested that the four bolts supplied with it (four 180mm M12 expanding bolts, one for each corner) are unsuitable for brick walls and that you might be able to recommend the appropriate fi...

Looking at buying the following "naked" tools: - SCW 22 A Circular saw SR 6 A22 RECIP SJT 6 A22 JIGSAW AG 125 A22 GRINDER I am looking at a tool storage system (Festool) with cart. Can anyone advise on the tool sizes so that I can source the correct boxes? Nothing on Hilti website?

I want to use the HIT-HY 200-A + HIT-V (5.8) M16 anchors for my project but am unable to find HIT-HY 200-A + HIT-V (5.8) in the 'Family' selection box

How do we contact Hilti Innovation dept ?

Some of our work equipment was stolen, but recovered. The water hose that connects the coring rig to the pressurised water bowser is missing. Is it possible to buy the hose? It doesnt appear to be a standard hose connection, or i would just make one.

We are just about to put in an order for 240 16mm chemi anchor bolts and 250 resin packs what will the delivery time frame be for these to site in gravesend

Looking to find out how to go about setting up a tool hire account no a established company self employed