Engineering Centre

I'm trying to fix a new 300mm thick slab to an existing 150mm thick slab (ground bearing- top of slabs flush). I've been advised I should use HIT-HY200 RV3, but this option isn't available on PROFIS,

New Hilti Profis user. Can I have more than one profile on a base plate? and a load on each profile? Bracketry design with more than one support per baseplate

I am looking to use the Hilti software to design fixings for a steel PFC fixed to a wall, with several Hilti anchors throughout the channel length. I recall doing this in the past but can't seem to in the latest version of the software. Can anybody help?

I have a bracket to fix to a precast concrete wall plank. The plank has an insulated core and the outer concrete thickness is 70 mm. Loads are small. But i am unable to adopt the software as it calls for 100 mm minimum

Can hilti software take into account cast-in bolts? I have to move two bolts out of 4 cast in and I would like to know if this can be considered in the software

Can you please advice on the best anchor for the frequent loads or for vibration from hanging on the basketball rim. Basketball goal post will be fixed to existing RC concrete frame through secondary steel frames. Thank you.

Can you please provide us with the ultimate compressive strength of the resins products you are providing for filling annular gaps as our structural engineer need to choose which product to use?

I want to change my Profis anchor calculations from HIT-HY-200A to HIT-HY 200-R in profis engineering suite as the contractor is proposing this product but I cannot see it in the options. Is it being filtered out somehow? Is there much difference between these products?

I have added a new user but they cant see company projects

Filling the annular gaps is not logistical for the design, however the software will not allow me to run the model without selecting "Fill holes with SOFA". The gap below the baseplate is to be grouted, which will pick up the shear force through the anchors, so I do not see why this is a requirement.