Engineering Centre

I am designing a new slab which will be connected to an existing one, so is there an option to check the normal rebars as connectors using hilti tool?

I am to design a tank anchoring, tank is fixed with a round rim with 16 bolts, the max uplift force and shear per bolt is provided. Tank diameter is over 2m it is standing on a concrete slab and a plinth. Is it possible to design concrete anchoring using one of HILTI software? Can you help me to design HILTI anchorage bolts i...

Is it possible rotate a section about its horizontal axes such that edges of the base of one of the flange plates will be welded onto the anchor plate as opposed to the edge of the web and the flanges

What is the maximum size of back box (metal and plastic) that your putty pads have been tested to? We have media outlets and grid switches that require large back boxes. Can you share the test certs. Also, when using your intumescent acoustic putty pads, are there limitation of the proximity or number of outlets that you have...

Hello, Can you recomend a fixing and tool for fising thing metal plates to the underside of a stanless steel lintel. The fixing is safety critical however the loads are light.

i want to aplpy distributed load

Can i use this to design a cast in base plate?

We have been told to use V3 for a specialist application, as this is no longer available, is V4 its equivalent?

Why is it that HILTI profis (or ETAG 029 Annex C) limits the anchor capacity to the Pullout capacity of one brick? So, even if the embedment depth of the anchor is say 200mm, the pullout capacity is still based on the depth of a single brick, e.g. 115mm?

How to set the block size to standard 440x215x100? as the smaller brick sizes are only allowed if you perform on-site tests