Engineering Centre

I have a 150mm metal deck floor with 90mm of concrete above the deck. According to previous comments I have tried to use HST3 anchor but the screen I'm fixing is 1.9m tall with crowd loading and needs to be demount-able. Is it possible to use a HDK socket, I can't find this in the Profis software I'm using?

Hi there, would you be able to assist with an error I am getting here? I'm struggling to understand why there is an error saying I cant use the existing reinforcement to validate the design. "Supplementary reinforcement is only allowed with static and seismic, anchor arrangements up to 9 anchors and with EN1992-4 and at least...

100% UR for tension even when i reduce the load. Yet it still appears green and print out states checks are OK. 100.1% is not okay obviously. So i feel uneasy specifying fixings with 100% UR. But reducing the load should reduce the UR, no?

I am looking into the calculation of the brick breakout capacity and anchor pull out capacity calculated in Hilti Profis, the referenced technical guidance (ETAG 029 Annex C or TR054) do not seem to provide any equations or characteristic strengths (C.5.2.1.3 or C.5.2.1.4 in ETAG 029) needed to undertake these calculations. E...

Hi, Is there a way to input the masonry with a UK brick size of 215 x 102.5 x 65? The software doesn't seem to allow me to set the wall thickness at 102.5mm? Thanks.

Hi! There is missed HSA anchor type in the anchor list in some of the designs in ProfisEngineering (and in the some designs it is on the list). What can be the problem?

Why I attempt to design a rectangular baseplate with two rows of four cast in place anchours, I get an error that the anchor layout is not compatible with the baseplate chosen. Can you please advise how I might get around this or where I can find guidance on acceptable layouts?

How do I add a SLS load combination in PROFIS Engineering

Can I anchor more than 4 bolts in the design of angle connection in masonry? I can only see max 4 bolts built in option

Hi there, do you have unistrut feet for P5001T ?