Medium-duty channel system (MQ)
Medium-duty channel systems for the installation of pipe supports, ventilation ducts and cable trays. Designed specifically for greater flexibility and ease-of-use
All prices discounted net
An error occurred
Unfortunately, products matching your chosen category can not be loaded, due to technical issues. Please try again later. Thank you for your understanding.
No products matching your requirements
Unfortunately, there are no products matching your requirements. Please udpate or reset your applied filters.
All prices discounted net
Hot-dip galvanised (HDG) 21 mm high MQ strut channel for light-duty applications
- Height: 20.6 mm
- Material thickness: 2 mm
- Material composition: S235JR - DIN EN 10025
Hot-dip galvanised (HDG plus) 21 mm high MQ strut channel for light-duty applications
- Height: 20.6 mm
- Material thickness: 2 mm
- Material composition: S235JR - DIN EN 10025
Hot-dip galvanised (HDG) MQ installation double channel for medium-duty applications
- Height: 41.2 mm
- Material thickness: 2 mm
- Material composition: S250GD - DIN EN 10346
Hot-dip galvanised (HDG plus) MQ installation double channel for medium-duty applications
- Height: 41.2 mm
- Material thickness: 2 mm
- Material composition: S235JR - DIN EN 10025
Hot-dip galvanised (HDG) MQ installation channel for medium-duty applications
- Height: 41.3 mm
- Material thickness: 2 mm
- Material composition: S235JR - DIN EN 10025
Hot-dip galvanised (HDG plus) MQ installation double channel for medium-duty applications
- Height: 41.3 mm
- Material thickness: 2 mm
- Material composition: S235JR - DIN EN 10025
Hot-dip galvanised (HDG) MQ installation double channel for medium-duty applications
- Height: 82.6 mm
- Material thickness: 2 mm
- Material composition: S250GD - DIN EN 10346
Hot-dip galvanised (HDG plus) MQ installation double channel for medium-duty applications
- Height: 82.6 mm
- Material thickness: 2 mm
- Material composition: S235JR - DIN EN 10025
Hot-dip galvanised (HDG) 52 mm high MQ strut channel for medium/heavy-duty applications
- Height: 52 mm
- Material thickness: 2.5 mm
- Material composition: S235JR - DIN EN 10025
Hot-dip galvanised (HDG) MQ installation double channel for medium/heavy-duty applications
- Height: 124 mm
- Material thickness: 2.5 mm, 2.75 mm
- Material composition: S250GD - DIN EN 10346
Hot-dip galvanised (HDG) 72 mm high MQ strut channel for medium/heavy-duty applications
- Height: 72 mm
- Material thickness: 2.75 mm
- Material composition: S235JR - DIN EN 10025
Hot-dip galvanised (HDG) MQ installation double channel for medium/heavy-duty applications
- Height: 124 mm
- Material thickness: 3 mm
- Material composition: S250GD - DIN EN 10346
Hot-dip galvanised (HDG) double bracket for medium-duty applications
- Material thickness: Channel: 2 mm, Baseplate: 8 mm
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
Hot-dip galvanised (HDG) bracket with a 41 mm high, single MQ strut channel for medium-duty applications
- Material thickness: Channel: 2 mm, Baseplate: 8 mm
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
Hot-dip galvanised (HDG) angle brace for brackets
- Material thickness: 3 mm
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
Hot-dip galvanised (HDG) pipe clamp saddle for connecting threaded components to MQ strut channels
- Material composition: Nut: EN-GJMW-450-7 - DIN EN 1562, Plate: S235JR - DIN EN 10025, Plastic: PB
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- For use with: MQ channels
Hot-dip galvanised (HDG) wing nut for connecting modular support system components
- Tightening torque: 40 Nm
- Thread connection - M: M12
- Material composition: Wings: plastic PA, Nut: C4C - DIN EN 10263
Hot-dip galvanised (HDG plus) wing nut for connecting modular support system components
- Material composition: Wings: plastic PA, Nut: QStE 380 TM, SEW 92
- Surface finish: Multi-layer coating
- For use with: MQ channels
Hot-dip galvanised (HDG) bored plate for trapeze assembly and anchoring
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
Hot-dip galvanized (HDG) 90-degree angle for connecting multiple MQ strut channels
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
Hot-dip galvanised (HDG) 45- or 135-degree angle for connecting multiple MQ strut channels
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
Hot-dip galvanised (HDG) 90-degree heavy angle for connecting multiple MQ strut channels in medium/heavy-duty applications
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
Hot-dip galvanised channel connector used as a longitudinal extender for MQ strut channels
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
Hot-dip galvanised (HDG) flat plate connector used for joining channels at right angles
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
Hot-dip galvanised channel foot for fastening strut channels to concrete
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
Hot-dip galvanised (HDG) channel connector for two-dimensional structures
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
Hot-dip galvanised (HDG) channel connector for three-dimensional structures
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
Hot-dip galvanised (HDG) channel foot for fastening channels to concrete in light/medium-duty applications
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
Hot-dip galvanised (HDG) channel foot for fastening channels to concrete at an angle
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
Hot-dip galvanised (HDG) channel foot for fastening channels to concrete
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
Hot-dip galvanised channel foot for fastening channels to different base materials at an angle
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
Hot-dip galvanised (HDG) beam clamp for connecting MQ strut channels directly to steel beams
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
Hot-dip galvanised (HDG) beam clamp for connecting MQ strut channels directly to steel beams
- Material composition: U-bolt: S235JRG2 - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
Hot-dip galvanised (HDG) elements for assembling 3D structures on site
- Wrench size: 17 mm
- Tightening torque: 40 Nm
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
Hot-dip galvanised (HDG) clamp for cross-connection of one MQ strut channel to another
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness: 4 mm
Hot-dip galvanised (HDG) channel tie to create double channels
- Material composition: S235JR - DIN EN 10025
- Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
- Wrench size: 13 mm
Summary:
Medium-duty channel systems for the installation of pipe supports, ventilation ducts and cable trays. Designed specifically for greater flexibility and ease-of-use