Search Results
1241 Products for "te-cx"
Filter
ultimate
- Description
- Cable clasp with pre-mounted, ultimate-performance nail for fastening cables to tough concrete using powder-actuated tools
- Application
- Cable Fastenings
- Material
- Polyamide (PA), Halogen-free
- For use with (tools)
- DX 2, DX 351, DX 460, DX 5, DX 6
- Description
- 45-degree angle brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Hot-dip galvanised (HDG) connector used to connect MI girders longitudinally for long spans in heavy-duty applications
- Surface finish
- HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Tightening torque
- 84 Nm
- Description
- Marking head for the DX 462 powder-actuated tool used for marking on cold and hot metal surfaces
- Application
- Marking cold steel, Marking hot steel
- Base materials
- Steel
- For use with (tools)
- DX 462 CM, DX 462 HM
- Description
- Extra arm pads (left, right) for the Hilti shoulder exoskeleton
No technical data available
- Description
- Extra arm pads (left, right) for the Hilti shoulder exoskeleton
No technical data available
- Description
- Wire guide accessories for the DSW 3018-E wire saw
- Accessory type
- Pulley wheels
- Description
- Wire guide accessories for the DSW 3018-E wire saw
- Accessory type
- Wire guides
- Description
- Fastener guides for the DX 76 PTR powder-actuated nailer
- Fastener intake
- Single nail
- For use with (tools)
- DX 76 PTR
- Additional accessory information
- X-76-F-HVB-PTR fastener guide for HVB shear connectors
- Description
- Fastener guides for the DX 76 PTR powder-actuated nailer
- Fastener intake
- Single nail
- For use with (tools)
- DX 76 PTR
- Description
- Exchangeable fastener guides for the DX 6 powder-actuated tool
- Fastener intake
- Single
- Description
- Fastener guides for the DX 76 PTR powder-actuated nailer
- Fastener intake
- 10 nails
- For use with (tools)
- DX 76 PTR
- Additional accessory information
- MX 76 PTR nail magazine assy for DX 76
- Description
- Fastener guides for the DX E72 powder-actuated tool
- For use with (tools)
- DX E72
- Description
- Accessories and replacement parts for the GX 3 gas nailer
- For use with (tools)
- GX 3, GX 3-ME
- Additional accessory information
- Fastener guide for the GX 3 for IF applications
- Description
- Accessories and replacement parts for the GX 3 gas nailer
- For use with (tools)
- GX 3, GX 3-ME
- Additional accessory information
- Fastener guide for the GX 3 for ME applications
- Description
- Accessories and replacement parts for the GX 3 gas nailer
- For use with (tools)
- GX 3, GX 3-ME
- Additional accessory information
- Magnetic washer holder for the GX 3
- Description
- Accessories and replacement parts for the GX 3 gas nailer
- For use with (tools)
- BX 3, BX 3 02, BX 3-IF, BX 3-L 02, BX 3-ME, GX 120, GX 120-ME, GX 2, GX 3, GX 3-ME
- Additional accessory information
- Nail punch set for the GX 2, GX 120, GX 3 and BX 3
- Description
- Exchangeable fastener guides for the DX 6 powder-actuated tool
- Fastener intake
- Single
- Description
- Exchangeable fastener guides for the DX 6 powder-actuated tool
- Fastener intake
- Single
- Description
- Exchangeable fastener guides for the DX 6 powder-actuated tool
- Fastener intake
- Single
- Description
- Exchangeable fastener guides for the DX 6 powder-actuated tool
- Fastener intake
- Single
- Description
- Pole tool for use with the BX 3 cordless nailer
- For use with (tools)
- BX 3-IF, BX 3-ME
- Description
- Pole tool for use with the GX 3 gas nailer
- For use with (tools)
- GX 3-ME
- Additional accessory information
- X-PT G3 receptacle for the GX 3 pole tool, for overhead applications
- Description
- Pole tool for use with the GX 120 gas nailer
- For use with (tools)
- GX 120, GX 120-ME
- Pole tool length
- 585 mm
- Additional accessory information
- Receptacle for the GX 120 pole tool, X-PT for overhead applications
- Description
- Pole tool for use with the BX 3 cordless nailer
- For use with (tools)
- BX 3-IF, BX 3-ME
- Additional accessory information
- X-PT B3 receptacle for BX 3 pole tool, for overhead applications
- Description
- Exchangeable fastener guides for the DX 6 powder-actuated tool
- Fastener intake
- Single
- Description
- Exchangeable fastener guides for the DX 6 powder-actuated tool
- Fastener intake
- Single
- Description
- Exchangeable fastener guides for the DX 6 powder-actuated tool
- Fastener intake
- Single
- Description
- Exchangeable fastener guides for the DX 6 powder-actuated tool
- Fastener intake
- Single
- Description
- Top-performance circular saw blade with cermet teeth to cut faster and last longer in structural steel, including stainless
- Blade features
- Clean cut, Cold cut, Fast cut, Long life, Special for cordless, Ultra-thin-kerf technology, Cermet tipped
- Blade diameter
- 165 mm
- Number of teeth
- 52
- Description
- Setting tool for driving compatible expansion anchors (e.g. HSV/HSA/HST/KB3/KB-TZ2) into concrete
No technical data available
- Description
- Knockout die, punch and draw stud sets for punching ½ - 4” diameter conduit holes in up to 10-gauge steel
No technical data available
- Description
- Self-tapping screw (zinc-plated carbon steel) with 16 mm washer for fastening steel/aluminium sheets to HTU channels
- Base materials
- Carbon steel, HTU (cast-in channel)
- Environmental conditions
- Dry indoor
- Screw head diameter
- 13 mm
- Description
- Jig saw blades with reversed teeth for a clean result on the top surface of soft wood and plywood
- Product class
- Premium
- Base material
- Softwood (fir, pine, etc.), Plywood, Fibre board, Chipboard
- Blade features
- Straight cut, Precise cut
- Description
- Timber lifting system when paired with the S-WDF-Z timber screw, for lifting prefabricated roofs, walls and ceilings
- Application
- Hangers with threaded connectors
- Base materials
- Wood, Timber, Cross laminated timber (CLT)
- Environmental conditions
- Dry indoor, Outdoor with low pollution, Indoor with temporary condensation
- Description
- Cast-in anchor channels in standard sizes and lengths with the regulatory approvals needed for virtually any challenging project
- Material, corrosion
- Carbon Steel, Hot-Dip Galvanised
- Channel profile
- HAC-70, HAC-60, HAC-50, HAC-40
- PROFIS software
- Yes
- Description
- Base connector with pre-assembled Fast-Lock nut and bolt for anchoring strut channel structures to concrete or steel
- Material composition
- S235JR, Q235B
- Material and coating
- Carbon steel - indoor coated
- Material thickness
- 4 mm
- Description
- Base connector for anchoring MT-70 and MT-80 girder structures to concrete, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Beam clamp for fastening MT-70 and MT-80 girders to steel beams, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Beam clamp for fastening MT-90 and MT-100 girders to steel beams, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Splice connector for coupling MT-90 or MT-100 girders end-to-end, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Splice connector for coupling MT-70 or MT-80 girders end-to-end, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Base connector for anchoring light-duty strut channel structures to concrete or steel, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- hot-dip galvanised (HDG) double fixed point with one-sided bracing for heavy-duty applications up to 20 kN
- Material composition
- Steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Rectangular hollow-section profile used mainly for window applications as part of the floor-spanning S2S system
- Material composition
- EN AW-6063 T66
- Description
- Filter bags for the WMS 100 water management system for the supply of cooling water plus collection and filtration of waste water from diamond drilling systems
- Accessory type
- Filtration bags
- For use with
- DD-WMS 100
- Additional accessory information
- Large filtration bag for DD-WMS 100 in multipack of 5 bags
- Description
- Filter bags for the WMS 100 water management system for the supply of cooling water plus collection and filtration of waste water from diamond drilling systems
- Accessory type
- Filtration bags
- For use with
- DD-WMS 100
- Additional accessory information
- Large filtration bag for DD-WMS 100 in multipack of 25 bags
standard
- Description
- Standard HSS roll-forged drill bit for drilling small holes into steel ≤400 N/mm², similar to DIN 338 / 340
- Product class
- Standard
- Connection end
- Smooth shank
- DIN
- DIN 338
- Description
- Top-performance circular saw blade with cermet teeth to cut faster and last longer in stainless and steel sheet metal
- Blade features
- Clean cut, Cold cut, Long life, Special for cordless, Ultra-thin-kerf technology, Cermet tipped
- Blade diameter
- 165 mm
- Number of teeth
- 66
New
ultimate
- Description
- Ultimate diamond cup wheel for the DG/DGH 150 diamond grinder – for faster grinding of concrete, screed and natural stone
- Tool type
- Concrete grinder DG/DGH 150
- Base material
- Concrete, Screed, Natural stone
- Product class
- Ultimate
- Description
- Ultimate diamond cup wheel for the DG/DGH 150 diamond grinder – for removing thin coatings such as paint and adhesive
- Tool type
- Concrete grinder DG/DGH 150
- Base material
- Coatings, Adhesive, Paint, Epoxy
- Product class
- Ultimate
New
premium
- Description
- Premium diamond cup wheel for the DG/DGH 150 diamond grinder – for faster grinding of concrete, screed and natural stone
- Tool type
- Concrete grinder DG/DGH 150
- Base material
- Concrete, Screed, Natural stone
- Product class
- Premium
- Description
- Chargers for Hilti measuring items such as lasers, detection tools, layout tools etc. (please cheque the compatibility of specific items)
No technical data available
- Description
- Self-tapping screw (A2 stainless steel) with 16 mm washer for fastening steel/aluminium sheets to extra-thick steel
- Base materials
- Carbon steel
- Environmental conditions
- Dry indoor, Indoor with temporary condensation, Outdoor with low pollution, Outdoor with moderate concentration of pollution
- Screw head diameter
- 10 mm
- Description
- Collated self-drilling screws for use with the SDT 9 stand-up handle for sidelap and frame fastening in decking
- Base materials
- Carbon steel
- Environmental conditions
- Dry indoor, Indoor with temporary condensation, Outdoor with low pollution, Outdoor with moderate concentration of pollution
- Washer type
- none
- Description
- Serrated cast-in anchor channels in custom sizes and lengths for top-of-slab installations catering to 3D loads
- Material, corrosion
- Carbon Steel, Hot-Dip Galvanised
- Channel profile
- HAC-V-T 50 EDGE C
- PROFIS software
- Yes
- Description
- Serrated cast-in anchor channels in custom sizes and lengths for top-of-slab installations catering to 3D loads
- Material, corrosion
- Carbon Steel, Hot-Dip Galvanised
- Channel profile
- HAC-V-T 50 EDGE
- PROFIS software
- Yes
- Description
- Flame-retardant cable clasp with pre-mounted, ultimate-performance nail for fastening cables to tough concrete using powder-actuated tools
- Application
- Cable Fastenings
- Material
- Polyamide (PA), Halogen-free, Flame-retardant
- For use with (tools)
- DX 2, DX 351, DX 460, DX 5, DX 6
- Description
- Base connector for fixation of MT-90 and MT-100 girder structures to steel, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Post base connector for anchoring light-duty strut channel structures to concrete or steel, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)