Engineering Centre

Do you have a risk assessment for the use of SCM 22-A CORDLESS METAL Saw. Using it on a building site and would like to know if we need a hot works permit/fire protection to use it.

Could you please let me have the M/S2 for the Hilti DSH 600X

Hi, I'm looking to check a detail for a series of post fixed bars into a core wall for a stair landing. Two queries: 1) Do you always have to specify a baseplate and column profile even if none present? 2) The Hilti-500 options don't seem to show an option for normal rebar (as opposed to threaded rod etc, see attached) Is it ...

I'm looking to get spare part , for bit insert , but i don't know correct number from diagram if posible please

Hi, I am working on a structural assessment of the Hilti anchored baseplate with a standoff of 30-50mm filled with epoxy grout. I am unable to calculate this in Profis software (there is a message saying "The current Seismic regulation (EN1992-4) does not cover standoff with grout applications, where t >= 0.5d." Can you please...

Hello.Where i can find details for minimum spacing distances for metal pipes passing trough a drywall?thank you

Hi hi do I go about purchasing a new vertical lens on the pm2-LG I opened the case today and noticed the lens was broken laser level? many thanks

I need to resin anchor an underwater staple into position

A warehouse is currently under renovation. Existing was ties between 190mm thick blockwork wall and steel column have failed. Please see the photograph below.  What fixing or system could you recommend for the replacement of the wall ties?  Column flange approx. 20mm. Wall to column varies (about 50 to 100mm).

What’s the detail/requirement for fire stopping a cable trunking as there is no info on your data sheets for this detail?