DD 250-CA Core drill
Advanced heavy-duty diamond drilling tool with optional Cut Assist autofeed unit for coring very small to large diameter holes of 12-500 mm (1/2" - 20”)
- Diameter range: 12 - 500 mm
- Base material: Concrete, Reinforced concrete, Asphalt
- Operation mode: Rig-based drilling system
Technical Data
Diameter range
12 - 500 mm
Base material
Concrete, Reinforced concrete, Asphalt
Operation mode
Rig-based drilling system
Number of gears
4
No load RPM
gear 1: 240 rpm; gear 2: 580 rpm; gear 3: 1160 rpm; gear 4: 2220 rpm
Weight according to EPTA-Procedure 01/2003 without battery
15.4 kg
Weight of complete system
37 kg
Dimensions (LxWxH)
630 x 190 x 215 mm
A-weighted emission sound pressure level
93 dB (A) 1
Tri. vibr. value for drilling into concrete (wet) with diamond core bit A (ah,DD)
2.5 m/s²
Tri. vibr. value for drilling into concrete (wet) (ah,DD) - core bit A
HCL/HCS
- According to the applicable product standard (see the Operating Instruction for more details)
Documents
Features & Applications
Features
- Air-cooled, heavy-duty drive unit – core drill built for high performance with a sturdy design and convenient controls
- Extremely wide diameter range – four-speed gearing for use with most core bit sizes
- Hole-starting function – low-vibration, low-speed mode to start drilling with large-sized core bits
- Hilti Cut Assist – equips the core drill for fully automated drilling. Starts when surface is detected, then continuously optimises speed and water flow, even when cutting through rebar. Cut Assist means much higher productivity and more time for other tasks (optional DD AF-CA H autofeed unit required)
- Real-time information display – digital spirit level, gear selector, power control function, detailed usage statistics and easy-to-understand service messages
Applications
- Core drilling penetrations for ducts, pipes and cables
- Core drilling blind holes for setting anchors or post-installed rebar
- Stitch drilling for breaches
- Assisted drilling of large quantities of holes with DD AF-CA H autofeed unit
- Assisted drilling of deep holes and extremely large diameters with DD AF-CA H autofeed unit
For approval or certificate information, please see individual items.
Related Products
A single unit for the supply of cooling water as well as the collection and filtration of wastewater from diamond drilling systems
Drill stand for heavy duty Hilti coring machines (see technical data for tool compatibility)
Product Videos
Arrange a Demo & Support
Would you like an interactive demonstration of this product? Meet one of our product experts for a free and hands-on presentation.
Use this instant messaging tool to get easy and quick access to our Customer Service team.</br>This service is available during business hours Mon - Thur 09:30 - 16:00 & Fri 09:00 - 16.00
Let us call you back and connect you with one of our competent Hilti advisors. You will be contacted within a couple of minutes during business hours 8:00 AM – 5:00 PM.