Accessories for Fasteners

HAT 28 Anchor tester Tester for proof loading and determination of pullout resistance of anchors and DX fasteners

IDMS Metal insulation dowel Insulation mandrel

Hose 30CM Mixers and extensions for injectable mortars

Connecting piece HIT-DL A Injectable mortar accessories for blowing out

Blow-out pump Injectable mortar accessories for blowing out

Blow-out gun G 1/4" Injectable mortar accessories for blowing out

Coupler HIT-DL K Injectable mortar accessories for blowing out

Extension hose HIT-DL 10/0.8 Injectable mortar accessories for blowing out

Extension hose HIT-DL 16/0.8 Injectable mortar accessories for blowing out

Mixer HIT-RE-M Mixers and extensions for injectable mortars

Mixer HIT PM Mixers and extensions for injectable mortars

HIT-SZ Injection accessories Accessories for injectable mortars, including piston plugs and extension hoses

Air nozzle Injectable mortar accessories for blowing out (Air nozzle)

Coupler VL-K Extension hose to be used together with the HIT-SZ piston plug for injectable hybrid/epoxy mortal

Extension hose HIT-VL 16 (10m) Extension hose to be used together with the HIT-SZ piston plug for injectable hybrid/epoxy mortal

Hose HIT-VL 11 (1m) Extension hose to be used together with the HIT-SZ piston plug for injectable hybrid/epoxy mortal

Extension tube HIT-VL 16/0.7 Injectable mortar accessories for blowing out

Setting tool HSU ST-G M8 manual Setting tool – required for installation of HSU-R stone undercut anchors

Setting tool HHD-S Setting tool

r12980595

TE-C-HSC-MW Setting tool Setting tool (HSC)

TE-C-HDA-ST Setting tool Setting tool – required for installation of HDA undercut anchors

TE-Y-HDA-ST Setting tool Setting tool – required for installation of HDA undercut anchors

TE-C-HDA-RT Anchor removal tool Disassembly tool – for easy removal of HDA undercut anchors

TE-C-HDA-GT Undercut tool Undercut tool – for creating the undercut for HDA anchors where rebars are hit

HSV/HSA/HST/KB3/KB-TZ2 Setting tool Setting tool for driving compatible expansion anchors into concrete

HSD-M Setting tool Setting tool for drop-in anchors

HSD-G Drop-in anchor setting tool Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors

TE-C HEX, TE-Y HEX Setting tool Setting tool for capsule anchor rods with hexagon heads

TE-C-E Setting tool Setting tool for capsule anchor rods with conical heads

TE-Y-E Setting tool Setting tool for capsule anchor rods with Conical heads

HIS-S Setting tool Setting tool for internally threaded sleeves

HMU-ST Setting tool Setting tool (HMU)

HKD-TE-CX Setting tool (short) Setting tool for short HKD anchors with an integrated SDS Plus (TE-C) stop hammer drill bit

TE Setting adapter (HVU2) Setting adapter for capsule anchor rods with hexagon heads

HVU2 Setting tool Setting tool for HAS-U anchor rods with HVU2 capsules

TE-YRT Hole roughening tool Roughening tool for diamond-cored holes in concrete

HIT-CR-M Centring ring Plastic centring ring for rods and rebar

Screw guide ST-SG 5.5 Screw guide for the ST 1800 screw driver – for fastening sandwich panel screws

Inspection card S-IC BT Inspection card S-IC BT for S-BT threaded screw-in studs to ensure the correct screw-in depth

Socket wrench insert X-NSD 1/4"-16mm Accessories for X-BT-MF threaded studs, including sockets, T-handles and torque tools

Torque tool X-BT 1/4" - 8Nm Accessories for X-BT-MF threaded studs, including sockets, T-handles and torque tools

Drip guard HIT-OHC1 Injectable mortar accessories for overhead applications

Wedge HIT-OHW Injectable mortar accessories for overhead applications

DPG 100 Anchor tester Anchor tester

Drip guard HIT-OHC2 Injectable mortar accessories for overhead applications

Calibration card S-CC BT HC 6 Calibration card for S-BT threaded screw-in studs to ensure the correct screw-in depth

Calibration card S-CC BT 6 Calibration card for S-BT threaded screw-in studs to ensure the correct screw-in depth

S-IP Insulation plug Insulation plug for use with S-ID screws to help prevent thermal bridging

Torque tool S-BT 1/4" - 5Nm 5 Nm torque tool for installing S-BT threaded screw-in studs on aluminium or steel (thickness < 6 mm)

Check gauge HUS 12-16mm cordl. Check gauge for HUS4 screw anchors

Check gauge HUS 12-14-16mm cordl. Check gauge for HUS4 screw anchors

Check gauge HUS 8-10-14mm cordl. Check gauge for HUS4 screw anchors

Check gauge HUS 10-14-16mm cordl. Check gauge for HUS4 screw anchors

S-TB Torque bar Torque-controlled socket wrench for setting HSA anchors

Check gauge D=8-10-14mm Check gauge for HUS4 screw anchors

Accessory kit Hit Profi Rebar box HIT injectable mortar accessory sets

Kit HIT plastic box Protective storage and transport container for HIT injection mortars

Blow-out bulb 8mm Bulb Pumps

Torque tool X-BT 1/4" 20Nm / 14.8lbft Torque tool for use with new-generation X-BT threaded studs

Setting tool TE-C-HFB-ST Tool for HFB anchors

HIT-CB Collar bush Plastic collar bushing for rods and rebar

Torque tool S-BT 1/4" - 16Nm 16 Nm torque tool for installing S-BT threaded screw-in studs on steel (thickness < 6 mm)

HIT-RB Brushing and guiding accessories Injectable mortar accessories for brushing and guiding