Cut deeper
Concrete
Make cuts up to 150 mm in concrete with a 360 mm blade using a DSH 900-22 battery cut-off saw.
Concrete saws
Cut more than you think
Cut to size
Masonry
Make light work of bricks and blocks with our DSH 600-22 and DSH 700-22 battery cut-off saws.
Cut with power
Asphalt
Get up to 20% more power with new model DSH 700-22 battery cut-off saw.
Cut safer
Metal
For safer cuts, use our extra long-lasting SPX metal cutting disc.
Cut deeper
Concrete
Make cuts up to 150 mm in concrete with a 360 mm blade using a DSH 900-22 battery cut-off saw.
Cut to size
Masonry
Make light work of bricks and blocks with our DSH 600-22 and DSH 700-22 battery cut-off saws.
Cut with power
Asphalt
Get up to 20% more power with new model DSH 700-22 battery cut-off saw.
Cut safer
Metal
For safer cuts, use our extra long-lasting SPX metal cutting disc.
Designed for productivity and safety
Increased drop and kickback protection
Unique 3D Active Torque Control (ATC) for battery saws stops tool in ≤ 1 second
Fast-acting blade brake
Stops battery saw discs spinning in ≤ 4 seconds after trigger release
Virtually dust-free cutting
The DWP 15-22 water pump suppresses dust to within allowable limits – ideal for battery saws.
Total system performance
Get up to 30% more work per charge for battery saws with battery-optimized blades
Save over one ton in CO2 emissions per year with the battery-powered DSH 600-22.¹
BATTERY OR GAS?
Pick your power source
No matter what your cutting task, we have the heavy-duty performance and power you need. Choose battery cut-off saws on the Nuron platform for both indoor and outdoor work when you’re cutting the equivalent of 1–2 gas tanks a day. Go with gas saws when you’re using two or more gas tanks a day in locations where you don’t have access to power and can’t plug in your chargers.
Battery
What you can do with 2x2 batteries*
Up to
22
Up to
95
Gas
When to use gas
2 or more gas tanks / day
When you need continuous power
* *Based on internal testing with:
DSH 600-22 ATC and DSH 700-22 ATC battery-powered cut-off saws. Figures shown are based on using 2x2 B 22-290 Nuron batteries and 300 mm SPX Universal A blade. For curbstones, height was 300 mm and width was 100 mm. For rebar, 16 mm rebar (size 5) was used. Jobsite conditions, such as temperature, humidity, dust levels, and materials being worked on, can significantly affect the maximum amount of work possible with one battery charge.
‘Our cut-off saws are good. But they do even more when used with Hilti blades for optimum performance.’
FAQs
Cut-off Saws
Cut-off Saws
(1) Based on use of two sets of two B 22-290 batteries and 2x C8-22 230V chargers for 6 hours a week and 2.4 tank refills per hour for the DSH 600-X gas cut-off saws.