Heavy-duty channel system (MI)

MI

Hot-dip galvanised (HDG) installation girders with greater adjustability for heavy-duty applications

• Material composition: DD11 MOD – HN 555-4, S235JR – EN10025-2
• Surface finish: Hot-dip galvanised, 75µm - DIN EN ISO 1461

From £227.73

Compare (1)

MIC-C90-DH

Hot-dip galvanised (HDG) bracket for heavy-duty connections to concrete

• Material composition: Hot-dip galvanised acc. to DIN EN ISO 1461
• Surface finish: HDG: min 55 µm

From £250.62

Compare (1)

MIC-C120-DH

Hot-dip galvanised (HDG) bracket for heavy-duty connections to concrete

• Material composition: Hot-dip galvanised acc. to DIN EN ISO 1461
• Surface finish: HDG: min 55 µm

From £364.90

Compare (1)

MIC-S120

Bracket

• Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
• Surface finish: HDG: 75 µm - ASTM A123

Error occurred

Please contact us.

Compare (1)

MIC-S90H

Hot-dip galvanised (HDG) bracket for heavy-duty connections to steel

• Material composition: Hot-dip galvanised acc. to DIN EN ISO 1461
• Surface finish: HDG: min 55 µm

From £227.84

Compare (1)

MIC-S120H

Hot-dip galvanised (HDG) bracket for heavy-duty connections to steel

• Material composition: Hot-dip galvanised acc. to DIN EN ISO 1461
• Surface finish: HDG: min 55 µm

From £156.19

Compare (1)

MIC-C-AA/-D

Hot-dip galvanised (HDG) baseplate for fastening MI-90 girders to concrete using two anchors

• Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
• Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
• Tightening torque: 84 Nm

From £58.11

Compare (1)

MIC-C-DH

Connector (for concrete)

• Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
• Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
• Tightening torque: 84 Nm

From £263.44

Compare (1)

MIC-CU-MA

Connector

• Weight: 2.21 kg
• Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
• Tightening torque: 84 Nm

£147.04

Compare (1)

MIC-CU-MAH

Hot-dip galvanised (HDG) connector for fastening girders directly to concrete at angles between 0 and 180 degrees

• Weight: 2.26 kg
• Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
• Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461

£165.20

Compare (1)

MIB-CDH

Hot-dip galvanized (HDG) baseplate for fastening MI girders to concrete

• Weight: 6.77 kg
• Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025

£180.68

Compare (1)

MIC-S

Connector (steel)

• Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
• Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
• Tightening torque: 84 Nm

From £140.30

Compare (1)

MIC-SH

Hot-dip galvanised (HDG) baseplate for fastening MI-90 girders to steel for heavy-duty applications

• Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
• Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
• Tightening torque: 84 Nm

From £205.60

Compare (1)

MIC-SH

Hot-dip galvanised (HDG) baseplate for fastening MI-120 girders to steel for heavy-duty applications

• Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
• Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
• Tightening torque: 84 Nm

From £258.10

Compare (1)

MIB-SH

Hot-dip galvanised (HDG) baseplate for fastening MI girders to steel

• Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
• Surface finish: HDG: min 55 µm - DIN EN ISO 1461

From £94.08

Compare (1)

MI-DGC

Hot-dip galvanised (HDG) double beam clamp for connecting MI girders to steel beams for heavy-duty applications

• Material composition: Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-6 - DIN EN 1562; U-bolt: Steel grade 8.8; Nut: Steel grade 8
• Surface finish: HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461
• Tightening torque: 84 Nm

From £108.92

Compare (1)

MI-SGC M12

Hot-dip galvanised (HDG) single beam clamp for connecting MIQ steel baseplates to steel beams

• Thread connection - M: M12
• Weight: 0.36 kg
• Material composition: Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-6 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel

£148.32

Compare (1)

MI-SGC M16

Hot-dip galvanised (HDG) single beam clamp for connecting MI steel baseplates to steel beams

• Thread connection - M: M16
• Weight: 0.51 kg
• Surface finish: HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461

£151.00

Compare (1)

MIC-C-UH

Connector for fastening MI girders to concrete

• Weight: 2.45 kg
• Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
• Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461

£61.25

Compare (1)

MIC-UH

Standard hot-dip galvanised (HDG) connector for fastening MI girders to one another

• Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; backing plate, toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel
• Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; backing plate, toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
• Tightening torque: 84 Nm

From £57.32

Compare (1)

MIC-BA /H

Ultimate hot-dip galvanised (HDG) connectors offering highest versatility within the MI modular system

• Weight: 2.23 kg
• Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; backing plate, toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel
• Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Backing plate, Tooth plate, Bolt, Nut 45 µm - DIN EN ISO 1461

From £108.58

Compare (1)

MIC-T

Hot-dip galvanised (HDG) connector for fastening MI girders perpendicularly to one another

• Weight: 2.2 kg
• Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel
• Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; toothed plate, bolt, nut 45 µm - DIN EN ISO 1461

£61.52

Compare (1)

MIC-L

Hot-dip galvanised (HDG) connector for fastening MI girders perpendicularly to one another

• Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; backing plate, toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel
• Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; backing plate, toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
• Tightening torque: 84 Nm

From £73.29

Compare (1)

MIC-90-LH

Connector

• Weight: 4.84 kg
• Material composition: C30 - DIN EN 10250-2
• Surface finish: HDG: 55 µm - DIN EN ISO 1461

£314.64

Compare (1)

MIC-U-MA

Hot-dip galvanised (HDG) multi-angle connector used with MIC-MAH connectors for fastening MI girders to one another at an angle

• Weight: 2.63 kg
• Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
• Tightening torque: 84 Nm

£91.88

Compare (1)

MIC MAH

Connector (multi-angle)

• Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
• Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
• Tightening torque: 84 Nm

From £192.24

Compare (1)

MIC-SC

Connector

• Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
• Surface finish: None (primer coating, basic connector)

From £54.50

Compare (1)

MIC-E

Connector

• Surface finish: HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
• Tightening torque: 84 Nm
• Wrench size: 19 mm

From £152.36

Compare (1)

MIA-EC

Girder end cap for safer and neater covering of MI and MIQ girder ends

• Material composition: Moplen EP 240H
• Temperature resistance: -30 - 90 °C

From £45.75

Compare (1)

MIA-EH

Easy hand screw

• Material composition: Bolt: 8.8 grade steel; toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562
• Surface finish: HDG: 45 µm - DIN EN ISO 1461
• Tightening torque: 84 Nm

From £46.10

Compare (1)

MIA-EH-P

Hot-dip galvanised (HDG) plate for easier fastening and one-handed adjustment of MI and MIQ connectors

• Weight: 0.29 kg
• Material composition: Plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; spring: 1.4319 AISI 302, 1.4310 DIN EN 10088
• Surface finish: HDG: 45 µm - DIN EN ISO 1461

£59.80

Compare (1)

MIA-OH

Hot-dip galvanised (HDG) screw for easier fastening and one-handed adjustment of MI and MIQ connectors

• Material composition: Steel grade 8.8
• Surface finish: HDG: 45 µm - DIN EN ISO 1461
• Tightening torque: 84 Nm

From £19.10

Compare (1)

MIA-TP

Hot-dip galvanised (HDG) tooth plate used with the MIA-OH bolt for fastening of MI and MIQ connectors

• Weight: 0.06 kg
• Material composition: S235 - EN 10025-2
• Surface finish: HDG: 45 µm - DIN EN ISO 1461

£41.40

Compare (1)

M12-F

Hot-dip galvanised (HDG) hexagon bolt used in various applications

• Thread - M: M12
• Material composition: Steel grade 8.8
• Surface finish: Hot-dip galvanized, 45 µm

From £69.60

Compare (1)

M12-F-SL-WS 3/4"

Prevailing torque hex nut

• Weight: 0.02 kg
• Material composition: Steel grade 8
• Surface finish: HDG: 45 µm - DIN EN ISO 1461

£105.00

Compare (1)