All prices discounted net
Ventilation pipe ring without sound insulation element and M8/M10 connection head
- Material composition: DD11 - DIN EN 10111
- Surface finish: Electrogalvanized - for dry indoor use only
From
£48.64
Ventilation pipe ring with sound insulation element and M8/M10 connection head
- Approvals: Acustic insulaton DIN 4109 inspected, Fire class B2
- Temperature resistance: -40 - 110 °C
- Material composition: DD11 - DIN EN 10111
From
£52.58
Galvanised air duct bracket for fastening ventilation ducts directly to ceilings
- Approvals: Acoustic insulation DIN 4109 inspected
- Thread connection - M: M8, M10
- Noise reduction: 16 dB (A)
£49.70
Galvanised air duct bracket for fastening or hanging ventilation ducts
- Approvals: Acustic insulaton DIN 4109 inspected
- Thread connection - M: M8, M10
- Noise reduction: 12 dB (A)
From
£41.40
Galvanised decking hanger for trapezoid sheet with sound insulation
- Approvals: Acoustic insulation DIN 4109 inspected
- Base material type: Trapezoidal sheet
- Noise reduction: 18 dB (A)
£37.54
Galvanised air duct hangers for fastening round air ducts with sound insulation
- Approvals: Acoustic insulation DIN 4109 inspected
- Thread connection - M: M8, M10
- Noise reduction: 18 dB (A)
£39.62
Galvanised air duct bracket for fastening light ventilation ducts overhead
- Approvals: Acoustic insulation DIN 4109 inspected
- Thread connection - M: M8, M10
- Noise reduction: 18 dB (A)
£49.70
Galvanised silencer for various applications
- Approvals: Acoustic insulation DIN 4109 inspected
- Noise reduction: 18 dB (A)
- For use with: Threaded rod: M8/M10
£69.00
Robust load distribution plate for installing air conditioning units, walkways, ventilation ducts, pipework or cable trays on flat roofs
- Material composition: Plate: die cast aluminium, Rubber plate: EPDM, Connector: S235JR - DIN EN 10025
- Surface finish: Connector: hot-dip galvanized
- Weight: 3050 g
£162.41
Protective separation fleece for use between MV-LDP load distribution plates and roof
- Material composition: Felt
- Weight: 70 g
£24.08
Galvanised insulating connector/silencer for use with tensile loads
- Noise reduction: 11 dB (A)
- Maximum load - F: 1200 N
- Material composition: DD11 - DIN EN 10111, EPDM
£103.36
Air duct clamp
- Tightening torque: 5 Nm
- Material composition: DD11 - DIN EN 10111
- Surface finish: Galvanized
£63.50
Load distribution plate
- Surface finish: Connector: hot-dip galvanized
- Maximum load - F: 10 kN
From
£139.78
