Back
Choose language
English
Choose language

AI G125

English

Information about the documentation

About this documentation

  • Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and use of the product.
  • Observe the safety instructions and warnings in this documentation and on the product.
  • Always keep the operating instructions with the product and make sure that the operating instructions are with the product when it is given to other persons.

Explanation of symbols used

Warnings

Warnings alert persons to hazards that occur when handling or using the product. The following signal words are used:
DANGER
DANGER !
  • Draws attention to imminent danger that will lead to serious personal injury or fatality.
WARNING
WARNING !
  • Draws attention to a potential threat of danger that can lead to serious injury or fatality.
CAUTION
CAUTION !
  • Draws attention to a potentially dangerous situation that could lead to personal injury or damage to the equipment or other property.

Symbols in the operating instructions

The following symbols are used in these operating instructions:
Image alternative Comply with the operating instructions
Image alternative Instructions for use and other useful information
Image alternative Dealing with recyclable materials
Image alternative Do not dispose of electric equipment and batteries as household waste

Symbols in illustrations

The following symbols are used in illustrations:
Image alternative These numbers refer to the illustrations at the beginning of these operating instructions.
Image alternative The numbering reflects the sequence of operations shown in the illustrations and may deviate from the steps described in the text.
Image alternative Item reference numbers are used in the overview illustration and refer to the numbers used in the key in the product overview section.
Image alternative These characters are intended to specifically draw your attention to certain points when handling the product.

Product-dependent symbols

Symbols on the product

The following symbols can be used on the product:
Image alternative Direct current (DC)

Product information

Image alternative products are designed for professional users and only trained, authorized personnel are permitted to operate, service and maintain the products. This personnel must be specifically informed about the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
  • Write down the serial number in the table below. You will be required to state the product details when contacting Hilti Service or your local Hilti organization to inquire about the product.
    Product information
    Gateway
    		 AI G125
    Generation
    		 01
    Serial no.

Declaration of conformity

Image alternative
We declare, on our sole responsibility, that the product described here complies with the applicable directives and standards. A copy of the declaration of conformity can be found at the end of this documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916 Kaufering, Germany

Safety

General safety instructions

Read all safety instructions and other instructions.
Keep all safety instructions and other instructions for future reference.
  • Stay alert, watch what you are doing and use common sense when working with this device, do not use this device while you are tired or under the influence of drugs, alcohol or medication.
  • Maintain tools and accessories carefully. Check that moving parts operate satisfactorily and do not jam, and make sure that no parts are broken or damaged in such a way that the tool might no longer function correctly. Have damaged parts repaired before using the tool. Many accidents are caused by poorly maintained tools.
  • Do not expose the appliance to rain or wet conditions. Water entering an electric appliance will increase the risk of electric shock.
  • Have the appliance serviced by a qualified repair person using only genuine Hilti spare parts. The safety of the appliance can thus be maintained.
  • Do not cover a type identification plate or other labels.
  • Do not cover any openings in the casing of the item of equipment.
  • Do not obstruct switches, displays and warning lights.
  • To avoid surface damage or chemical reactions, check that the adhesive is compatible with the surface before affixing the ON!Track gateway AI G125.
  • Keep away from children.

Product-specific safety instructions

  • Check the contents of the packaging. Make sure that nothing is damaged and that the contents are complete. If you notice defects or shortcomings that could impair the operability of the device, have them rectified by qualified personnel.
  • Make sure that the device is correctly installed and secured.

Additional safety instructions

  • The device is designed for indoor use only.
  • Although the device complies with the strict requirements of the valid directives, Hilti cannot entirely rule out the possibility of the device causing interference due to powerful electromagnetic radiation. This can lead to incorrect operation. Check the accuracy of the device by taking measurements by other means when working under such conditions or if you are uncertain. Similarly, Hilti cannot exclude the possibility of interference with other devices (e.g. aircraft navigation devices).

Description

Intended use

The Hilti ON!Track gateway AI G125 makes it possible to clearly identify a construction asset by way of a radio signal. After being activated, the AI G125 continuously transmits a radio signal that enables the user of the Hilti ON!Track system solution to track the asset. A smartphone app and a Web application for the management of construction assets is available from Hilti .

Items supplied

Gateway AI G125, two antennas, AC adapter, holder for gateway AI G125 (incl. screws and anchor), operating instructions

Third-party wordmarks, trademarks and logos

The Android™ and Chrome™ trademarks are the property of Google Inc.
The iPhone® and iOS trademarks are the property of Apple Inc.
All other trademarks and wordmarks used, even when not expressly stated or marked as such, are the property of their applicable owners.

Prerequisites

The functionality of the AI G125 can be used only with the Hilti ON!Track app or a Web browser. In order to use this app, a user name and a password are required.
For more information about Hilti ON!Track, contact Hilti Service or go to http://ontrack.hilti.com.
System failures can occur on account of updates of the AI G125 software.
The minimum requirements are as follows:
System requirements
System requirements
Smartphone / tablet
 Android™ 5 (or higher)
iOS® 10 (or higher)
ON!Track 3
Compatible with other wireless-enabled devices for data transfer
Browser
 Internet Explorer or Chrome™

Technical data

Protection class
 IP20
Rated voltage
 5 V
Rated current
 2.0 A
Dimensions
 127 mm x 127 mm x 30 mm
(5.0 in x 5.0 in x 1.2 in)
Dimensions, antennas
 196 mm x 38 mm x 13 mm
(7.7 in x 1.5 in x 0.5 in)
Operating temperature
 0 ℃ …60 ℃
(32 ℉ …140 ℉)
Storage temperature
 −20 ℃ …70 ℃
(−4 ℉ …158 ℉)
Signal range (can vary greatly depending on surrounding conditions)
 30 m
(98 ft - 10 in)
Frequency
 2,402 GHz …2,480 GHz
Maximum emitted transmission power
 12 dBm
Frequency, WiFi (802.11a/b/g/n/ac)
 2412 GHz - 2472 GHz, 5180 GHz - 5700 GHz (depending on region)
Maximum emitted transmission power, WiFi (802.11a/b/g/n/ac)
 19 dBm for the 2.4 GHz band; 18 dBm for the 5 GHz band
UMTS/HSPA frequency
 800, 850, 900, 1700/2100 (AWS), 1800, 1900, 2100 MHz (bands I, II, IV, V, VIII, IX, XIX); depending on region
LTE frequency
 700, 800, 850, 900, 1700/2100 (AWS), 1800, 1900, 2100, 2600 MHz (bands 1, 2, 3, 4, 5, 7, 8, 12, 18, 19, 20, 28); depending on region
GSM/GPRS/EDGE frequency
 GSM 850, 900, 1800, 1900 MHz; depending on region
Maximum emitted radiant power
 EGSM 850/900: class 4; GSM 1800/1900: class 1, corresponds to release 99; GSM 850/900/1800/1900 8-PSK: class E2, corresponds to release 99; UMTS 800/850/900/AWS/1800/1900/2100: class 3, corresponds to release 99; LTE 700/800/850/900/ AWS/1800/1900/2100/2600: class 3, corresponds to release 8

Operation

Installing gateway

Image alternative
  1. Using the wall plugs and screws provided, secure the bracket of the AI G125 to the wall/slab.
  2. Screw the antennas into the back of the AI G125.
  3. Secure the AI G125 to the bracket installed beforehand. Make sure that the device is secure.
  4. Connect the AI G125 to the electricity supply.

Transferring gateway to new location

Image alternative
  1. Disconnect the AI G125 from the electricity supply.
  2. Install the AI G125 at the new location. Do not connect the device to the electricity supply.
  3. Activate the ON!Track app and navigate to Transfer.
  4. Scan the QR code with your smartphone and enter the new data.
  5. Connect the AI G125 to the electricity supply.
    • The AI G125 is ready for use.

Transport and storage

Transport
  • Deactivate the product for transport.
  • Make sure that the equipment is held securely throughout all transport operations.
  • After the device has been transported, always check all visible parts for damage.
Storage
  • Always store this product with the electric supply cable unplugged from the electricity supply.
  • Store this product in a dry place, where it cannot be accessed by children or unauthorized persons.
  • After a long period of storage, always check all visible parts and controls for signs of damage and make sure that they all function correctly.

Further information

China RoHS (Restriction of Hazardous Substances)
Image alternative
This table is valid for the China market.

Disposal

Image alternative Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, your old tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative for further information.
Image alternative
  • Do not dispose of power tools, electronic equipment or batteries as household waste!

Manufacturer’s warranty

  • Please contact your local Hilti representative if you have questions about the warranty conditions.

RF radiation exposure declaration

This device complies with the radiation limits defined for the uncontrolled exposure environment. This device should be installed and operated with a minimum distance of 35 cm between radiation source and any part of the body.

FCC statement (applicable in US) / IC statement (applicable in Canada)

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by taking the following measures:
  • Re-orient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to a power outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced TV/radio technician for assistance.
Changes or modifications not expressly approved by Hilti may restrict the user’s authorization to operate the equipment.
This device is in compliance with paragraph 15 of the FCC Regulations RSS-210 of the ISED Regulations.
Operation is subject to the following two conditions:
  • This device shall cause no harmful interference.
  • This device must accept any interference received, including interference that may cause undesired operation.
In accordance with the regulations of Industry Canada, operation of the radio transmitters used is permissible only with the antennas approved by Industry Canada. To reduce potential radio interference for other devices, the type of antenna for the purpose should be selected such that the effective isotropic radiated power (EIRP) is no higher than necessary for successful communication.