4. Usage Restrictions
When using the Services, the Customer must fully comply with the following Usage Restrictions and is solely responsible to implement the required mitigation steps using its best efforts to avoid any potential incorrect usage:
Any and all information and data contained in the Services concern solely the use of Hilti products and are based on the principles, formulas and security regulations in accordance with Hilti's published technical information and operating, mounting and assembly instructions, etc., that must strictly comply with. The Hilti product portfolio used in connection with the Services may vary from country to country. All figures contained in the Services are average figures, and therefore, use-specific tests are to be conducted prior to using the relevant Hilti product. The results of the calculations carried out by means of the Services are based essentially on the data Customer puts in. Therefore, Customer bears the sole responsibility for the absence of errors, the completeness and the relevance of the data to be put in by Customer. Moreover, Customer bears sole responsibility for having the results of the calculation checked and cleared by an expert, particularly with regard to compliance with applicable codes, project requirements, norms and permits, prior to using them for Customer`s specific facility. The Software serves only as an aid to interpret norms and permits without any guarantee as to the absence of errors, the correctness and the relevance of the results or suitability for a specific application. Customer must take all necessary and reasonable steps to prevent or limit damage caused by the Services. All calculation results and designs are recommendations and need to be confirmed with a professional designer and/or structural engineers to ensure that the calculation results and designs are suitable and adequate for Customer`s specific jurisdiction and project requirements.
Furthermore, the section “WARNINGS” in each of the reports being generated with the Services form an integral part of the calculation assumption. Customer needs to comply with those to the strictest and needs to ensure that they are being reviewed by an appropriate expert prior to their use.