Engineering Centre

Am I able to send you a design for you to review? I want to use 6 bolts rather than the 4 the software seems limited to use.

Im looking to secure a Metsec 172 cleat to the top of a 140mm wide internal blockwork wall. However the transverse holes specified by the manufacturer is 70mm meaning that I only have 35mm clearance to each face of the dividing blockwork wall. Is there an anchor suitable?

In Hilti Profis, looking at an existing design I wish to substitute HIT-Z anchors with HDA-T anchors (as these are suitable for shock loadings). However, I cannot find the HDA-T anchors. I have changed the type from Chemical to Mechanical but still can't find them on the drop down.

Profis anchor says that I must use the design Method SOFA 1.0. Please explain how I select SOFA 1.0

Hej, Jag sitter med en infästningedetalj i betong där jag vill gjuta in en bultgrupp av rostftria syrafasta gängstänger (HAS-U A4). Jag vill alltså inte använda något kemankare. Alternativet finns inte att välja på i programmet när jag väljer "cast in place". Det går bara att välja en vanlig gängstång av kvalitet 5.8 eller 8....

My company has a premium license for PROFIS Engineering and I am wondering if it could check for concrete - concrete connection using dowel anchors/rebars as I could not find that option in the suite. The intention is to add a concrete plinth to an existing RC slab and design for the shear, tension and possible moment transfer...

We have Global Hilti Premium web license, but one of user say cannot find Anchor Channel Design, please advise whether this is include in our Premium license.

I require Suitable resin spec for fixing of anchors and rebar in to natural sandstone and design loads in shear and tension?

We have to drill and resin fixing 12mm dia. reinforcement bars (U-shape) into a bridge deck upstand which is close to an expansion joint, hence facing cyclic dynamic loading due to vehicle running. We don't expect any tension to be generated in the anchored bars, but still wanted to double check if there is any suitable resino...

Suggest a method of fixing