Engineering Centre

Using the hilti software and having issues with a beam to concrete connection.

I have a customer trying to install one of our motion bases. They have a concrete thickness of 160mm. Each motion base foot has a total of 8 off M20 fixings. These must withstand a vertical force for full payload and acceleration of 62kN. Can you advise type of fixing and whether the concrete thickness is sufficient. Our norma...

Can I add an additional column to a baseplate ? I would like to use 2 columns on a single baseplate.

Unable to increase embedment depth h_ef. 120 mm is locked. How can i increase it to prevent problem with anchorage?

Can i check the shear and pull-out resistance of a fixing into blockwork using plug and screw fixings? On the profis software it only allows me to use resin anchors into blockwork. I have looked at technical data sheets however they do not provide pull-out resistance to blockwork wall.

Need to core a hole vertically in to a concrete wall and extract/retrieve the core. What is the suggested method? Core depth up to 700mm

I would like to calculate anchoring without profile definition but when I swith off the 'use profile' option I get a message 'A profile is required for advanced anchor plate calculation'. Can I calculate without profile and without advanced plate calculation?

To support the roof and floors we are using a bolt on wall plate. The wall is a porotherm T240 which is a clay brick with ia large inside filled with concrete. We need an anchor to bolt the wall plates(75x150) to the wall Can you please advise. We have not found any information on this and will also undertake testing for whic...

Hi - I'm looking for a suitable product to infill drilled holes into structural RC elements that will reinstate them, near to post fix Hilti anchors - do you have any products that would work and can be 'gunned in'? Thanks

Please can you confirm the most appropriate materials from your range for the instances in the attached photographs?