Engineering Centre

Do you have solutions for the UK market for services which occupy more than 60% of the space of the builderwork (opening), and so they have reduced space for the fire stopping?

Hej! Vi behöver borra djupare än värden som står angivna som maximala i tabeller för efterinjektering av armering. Detta pga att vi måste borra genom en kraftigare konstruktionsdel, för att förankra oss i bakomliggande konstruktion. Vi ska använda Hilti HIT HY200 R för armering fi 16, fi 20 respektive fi 25. Vilket är det maxi...

Baseplate is 152 x 152 x 23 UC S275 with 100 x 100 lugs at fixing locations - but is modelled as a 350mm wide x 6.8mm plate. Loading is shear only. Why does it not work?

When I go to turn the visibility of the anchor numbers/ loads applied the site freezes and crashes. I have tried it on a number of different files and it is the same issue.

Hi, I have a connection detail where I want to resin anchor a baseplate to a concrete base but I need the anchor to be flush with the baseplate. Do you have a countersunk option for an M10 HAS-U in HIT-HY 200 resin? The thickness of the baseplate is 10mm and the thickness of the concrete base 150mm.

We are fitting a number of M30 Grade 8.8. AM Rods for a jib crane on a mining project. Can the Hilti apparatus test M30's? The highest factored anchor force is in the region of 50kN

We are looking at a detail that was originally designed with no standoff. Now a 25mm standoff is required and the contractor is asking if they can build this out with steel shims. We have altered the Hilit Profis calc to include a 25mm standoff with grout (attached) and the bolts are still working fine, but there's no option t...

Hi, Can you assist? In your datasheet you have one value per embedment depth for hmin minimum base material thickness. Your ETA document has one value of hmin which is given as h1+30mm, however h1 can be different. e.g. for a HUS14 with hom3 h is noted as 200mm. h1 for cleaned hole = 125mm, h = h1+30=155mm h1 uncleaned flo...

We are quoting a scheme where balconise are fixed back to a main building.

Hi i am using 2018420 HIT-Z M20x215 (insert) / 2022696 HIT-HY 200-A (mortar) can i use oversized holes up to 60mm in the base plate and utilise repair washers