Engineering Centre

I started this project in a Dutch environment. I would like to change the language of the calculation report to English. Can you help me out?

We have a connection brickwork over a catnic lintel. It appears that we cannot do this on software with out a concrete base/lintel. Is there away around this please?

The Facade is a Rockpanel and it is circa 10,700m2

When using the masonry fixings module of the software there are no options available to me for being able to adjust the dimensions or layout of the anchors?

Have found on US.hilti.com reference to title subject . values of shear/breakout & pull out seem to be for old hilti resins . and don't reconcile with other comparative products. Can Hilti up-date their product information

Hello, Existing RSA member is attached on a chimney masonry wall. Historical information refer to Hilti Hit C-100 M16 anchors used. Could you please share the technical data sheet for this resin in order to us ensure that additional load proposed can be undertaken by existing anchors? thanks

We have have a project in Edenbridge we are required to fix 18 mil plywood to 9 mm steel need to know which tool and fixings are required thank you

Hello, Could you help me please with material specifications for the AM A2-70 THREADED ROD. There is nothing on the webpage and I wonder what is their capacity, steel grade etc. Thanks. Michael

When I look in your technical data sheet for HIT-HY-200 and look at the setting details for HAS-U it is stated that if the spacing is smaller than critical spacing the design loads have to be reduced. However it is not stated how much or in what way they have to be reduced. To see what I am talking about, look at page 14 of th...

I need a masonry fixing into a standard brick 215 x 102 x 65- not sure if it is hollow or not, but using the hollow clay brick option. The only options that come up are using the resins, can we not use a mechanical anchor?