Skip to main content

See your customised prices and shop 24/7 Register now

Hilti

Highlights

Makes post-installed rebar connections as easy to design as anchor fastenings

The streamlined PROFIS Rebar software helps you quickly calculate post-installed rebar development/lap lengths according to proven standards.

Stay compliant with the latest codes and design reporting

This free structural engineering software uses the latest building codes and regulations, including Eurocode 2 and ACI 318. Easily generate a report with rebar development length and splice calculations, and ICC-ES approval references (ESR).

Control costs when repairing or retrofitting concrete

Designing using PROFIS Rebar gives you an economical alternative to removing and repouring concrete when cast-in-place rebar is missed during installation, or when an existing structure needs refitting.

Comprehensive static and seismic calculation options

Rebar development length can be calculated for lap splices, starter bars, special moment frames and special structural walls. Static, seismic, fatigue and dynamic load conditions are all supported by the software.

Shear applications using the Hilti Design Method

For shear friction post-installed rebar applications, the Hilti Design Method permits calculation of a shallower embedment than that calculated using ACI 318 shear friction provisions.

Set a new standard for post-installed rebar design

PROFIS Rebar structural engineering software gives you an efficient method for avoiding the redundancy, costs and risk of rework which comes with cast-in-place rebar.

Technical Data

Arrange a Demo & Support

Ask a Question

DESIGN POST-INSTALLED REBAR QUICKLY AND EASILY

Hilti PROFIS Rebar design software

Hilti PROFIS Rebar design software helps you design a wide range of rebar applications.

You can design for both Eurocode 2 and Hilti design methods, which allows you to design applications, which aren’t covered by Eurocode 2.

Easily design for shorter anchorage lengths with Hilti’s design method.

Hilti PROFIS Rebar includes all Hilti rebar products – which are rigorously tested and approved, meeting the highest safety standards.

Hilti PROFIS Rebar also integrates seamlessly into AutoCAD® and Revit®, and links directly to our BIM/CAD library allowing you to insert any Hilti rebar model straight into your design.

Tap into the power of Hilti PROFIS Rebar to:

  • Handle large volumes of calculations
  • Design with shorter anchorage lengths with Hilti design methods and chemical adhesives
  • Design according to Eurocode 2
  • Link straight to the Hilti BIM/CAD library – with 2D and 3D models of all Hilti rebar products and their technical data
  • Integrate seamlessly with AutoCAD® and Revit® design software
  • Quickly generate detailed technical reports – including approvals, product information and design methods

With simple and easy-to-use tools for designing, you can calculate:

  • Tension and compression lap splice lengths
  • Anchorage lengths for starter bars
  • Anchorage lengths for special rigid connections
  • Different loads – static, seismic, fire resistance and fatigue resistance
  • For different conditions – dry or wet concrete
  • For different drilling methods – hammer drilling or diamond drilling with or without a roughening tool

ACCESS HILTI PROFIS REBAR

You can access Hilti PROFIS Anchor free of charge here at Hilti website. Just sign up or log in.

2D/3D MODELS FOR HILTI REBAR

Hilti BIM/CAD Library

Find all Hilti rebar products in the Hilti BIM/CAD Library and insert them as a 2D or 3D model straight into your design.

Access the Hilti BIM/CAD library or through our AutoCAD® Plug-in and Revit®.

Hilti BIM/CAD Library

More Information

OUR HILTI ENGINEERING SERVICE

Interested in finding out more about Hilti PROFIS Rebar? Contact your local Hilti team.

Contact Hilti Engineering Team
Log in to proceed
Register now
Added to cart
Added to cart
Go to shopping cart