Nails for powder-actuated tools
Show me single and collated nails for use with powder-actuated tools – such as the smart DX 5 or the compact DX 2
All prices discounted net
An error occurred
Unfortunately, products matching your chosen category can not be loaded, due to technical issues. Please try again later. Thank you for your understanding.
No products matching your requirements
Unfortunately, there are no products matching your requirements. Please udpate or reset your applied filters.
All prices discounted net
Ultimate-performance collated nails for fastening to concrete and other base materials using powder-actuated tools
- Base materials: Concrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
High-performance single nail for use with powder-actuated tools on concrete and other materials
- Base materials: Concrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)
- Minimum thickness of base material (concrete): 80 mm
- Minimum thickness of base material (steel): 6 mm
Ultimate-performance collated nails for fastening to concrete and steel using powder-actuated tools
- Minimum thickness of base material (concrete): 80 mm
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Galvanised zinc coated <20 µm
High-performance collated nail for steel, for powder-actuated tools
- Base materials: Steel
- Minimum thickness of base material (concrete): 80 mm
- Minimum thickness of base material (steel): 6 mm
High-performance single nail for concrete and steel, for powder-actuated tools
- Minimum thickness of base material (concrete): 80 mm
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Galvanised zinc coated <20 µm
High-performance single nail for steel, for powder-actuated tools
- Base materials: Steel
- Minimum thickness of base material (concrete): 80 mm
- Minimum thickness of base material (steel): 6 mm
Ultimate-performance single nail with steel washer for fastening to concrete and steel using powder-actuated tools
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
- Environmental conditions: Dry indoor
Premium collated nails for fastening to concrete using powder-actuated tools
- Base materials: Concrete (soft), Concrete, Masonry (solid limestone brick), Concrete, soft, Soft to medium reinforced concrete
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
Premium single nail for fastening to concrete using powder-actuated tools
- Base materials: Concrete (soft), Masonry (solid limestone brick), Concrete
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
Premium single nail for fastening wood to concrete using powder-actuated tools
- Base materials: Concrete (soft), Concrete, Masonry (solid limestone brick)
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
- Base materials: Concrete, Concrete (soft), Masonry (solid limestone brick), Soft to medium reinforced concrete, Concrete, soft
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
Collated formwork nail for use with powder-actuated tools for temporary fixing to concrete
- Base materials: Concrete (soft), Concrete, Masonry (solid limestone brick)
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
Single formwork nail for use with powder-actuated tools on concrete
- Base materials: Concrete (soft), Concrete, Masonry (solid limestone brick)
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
High-performance single nail for use with powder-actuated tools on steel in corrosive environments
- Base materials: Steel
- Minimum thickness of base material (steel): 5 mm
- Corrosion protection: Stainless steel A4(316) or equivalent
Stainless steel single nail for steel and concrete, for powder-actuated tools
- Minimum thickness of base material (steel): 5 mm
- Corrosion protection: Stainless steel A4(316) or equivalent
- Environmental conditions: Dry indoor, Indoor with temporary condensation, Outdoor temporary applications, Outdoor with low pollution, Outdoor with moderate concentration of pollution
Single nail for use with powder-actuated tools on steel in corrosive environments
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Stainless steel A4(316) or equivalent
- Environmental conditions: Dry indoor, Indoor with temporary condensation, Outdoor temporary applications, Outdoor with low pollution, Outdoor with moderate concentration of pollution
Single nail with steel washer for use with powder-actuated nailers on steel and concrete in corrosive environments
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Stainless steel A4(316) or equivalent
- Environmental conditions: Dry indoor, Indoor with temporary condensation, Outdoor temporary applications, Outdoor with low pollution, Outdoor with moderate concentration of pollution
Single nail for fastening metal elements to steel structures with powder-actuated nailers
- Base materials: Steel
- Minimum thickness of base material (steel): 6 mm
- Environmental conditions: Dry indoor
- Base materials: Steel, Concrete
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Galvanised zinc coated <20 µm
Collated nails for fastening metal decks to steel structures with powder-actuated nailers
- Base materials: Steel
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Galvanised zinc coated <20 µm
Collated nails for fastening metal decks to steel structures with stand-up powder-actuated nailers
- Base materials: Steel
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Galvanised zinc coated <20 µm
Collated nails for fastening metal decks to light steel structures with powder-actuated nailers
- Base materials: Steel
- Minimum thickness of base material (steel): 3 mm
- Corrosion protection: Galvanised zinc coated <20 µm
Single nail for fastening metal decks to steel structures with powder-actuated nailers
- Base materials: Steel
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Galvanised zinc coated <20 µm
Single nail for fastening shear connectors to steel structures with powder-actuated nailers
- Base materials: Steel
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Galvanised zinc coated <20 µm
Carbon steel nail for use with the DX-Kwik pre-drilling technique and powder-actuated nailers on concrete (8 mm washer)
- Base materials: Concrete
- Minimum thickness of base material (concrete): 100 mm
- Corrosion protection: Galvanised zinc coated <20 µm
- Base materials: Concrete
- Minimum thickness of base material (concrete): 100 mm
- Corrosion protection: Galvanised zinc coated <20 µm
- Minimum thickness of base material (steel): 4 mm
- Environmental conditions: Dry indoor, Indoor with temporary condensation
- Material: Carbon steel
Summary:
Show me single and collated nails for use with powder-actuated tools – such as the smart DX 5 or the compact DX 2